Rowie WSN23T182 Touch Lamp Light

![Rowie-WSN23T182-Touch-Lamp-Light-product](https://manuals.plus/wp-

content/uploads/2024/01/Rowie-WSN23T182-Touch-Lamp-Light-product.png)

Product Information

The Rowie Touch Lamp 2PK is a set of two touch lamps designed for domestic indoor use. The lamps have a modern design and are suitable for various rooms in your home.

Specifications:

• Item no.: WSN23T182
• T : 68721886
• K : 43333042
• Rated Voltage: 220-240V ~ 50Hz
• Bulb requires : Max 25W E27 Edison Screw (Not Included)

Product Usage Instructions

Safety Precautions

Before using the Rowie Touch Lamp 2PK, please ensure you follow these safety precautions:

1. Read all instructions for assembly and use before connecting to an electricity supply.
2. Use only the recommended bulb rating as detailed on the lamp holder and/or label.
3. Do not use a bulb that is rated higher than the recommended capacity.
4. Avoid touching the bulb while the lamp is lit as it becomes very hot. Supervise others accordingly.
5. Switch off the lamp and unplug from the mains socket before cleaning or replacing a defective bulb. Allow the bulb to cool for at least 10 minutes before touching it.
6. Ensure the new bulb is securely installed in the holder before reconnecting to the power supply.
7. If you have any doubts or concerns, consult a qualified electrician.

Installation Instructions

Please follow these steps to install the Rowie Touch Lamp 2PK:

1. Caution: Assemble the lamp completely before connecting to the electricity supply.
2. Loosen the Socket Ring (C).
3. Remove the cover of the lamp shade before using.
4. Install the Lamp Shade (B) to the Lamp Holder (A) and lock the Socket Ring (C).
5. Install the bulb (Max 25W E27, not included) into the lamp holder.
6. Check to ensure that all components have been assembled correctly.
7. Connect the lamp to the mains supply.

FAQs

• Q: What should I do if any parts of the lamp are damaged?
  • A: If any parts of the lamp are damaged, disconnect it from the mains power. The lamp should be destroyed.
• Q: What should I do if the lamp stops unexpectedly or appears to malfunction?
  • A: If the lamp stops unexpectedly or appears to malfunction, unplug it from the mains and stop using it immediately. Seek assistance from a qualified electrician before reusing it.
• Q: Can I use the lamp outdoors?
  • A: No, this lamp has been designed for domestic indoor use only. Do not use it outdoors.
• Q: How long is the warranty period for this product?
  • A: The product comes with a 12-month warranty from the date of purchase. The warranty covers defects in materials and workmanship, provided that the product is used according to the accompanying recommendations or instructions.
• Q: What does the warranty cover?
  • A: The warranty covers your choice of a refund, repair (where possible), or exchange (availability dependent) if the product becomes defective within the warranty period. The reasonable expense of claiming the warranty will be borne by the business.
• Q: When does the warranty not apply?
  • A: The warranty will not apply if the defect is a result of alteration, accident, misuse, abuse, or neglect.

IMPORTANT SAFETY INSTRUCTIONS:

The following safety precautions should always be followed, to reduce the risk of electric shock, personal injury or fire. It is important to read all of these instructions carefully before using the product, and to save them for future reference or new users.

1. This product must only be used as intended in accordance with the enclosed operating instructions

2. Do not carry the appliance by the mains cable or pull the cable to remove the plug from the socket.

3. CAUTION: Electric shock hazard. The external flexible cable, plug or the switch of this lamp cannot be replaced. If any of these parts are damaged, disconnect from mains power. The lamp should be destroyed.

4. If the lamp stops unexpectedly or appears to malfunction, unplug from the mains and stop using immediately. Seck professional advice to rectify the fault or make repairs.

5. Switch off the power supply or unplug from the mains socket when not in use, before cleaning or changing accessories.

6. Avoid positioning the lamp where the power cable might be accidentally trapped or damaged.

7. Keep the lamp and cable away from sources of heat, sharp objects or anything that may cause damage.

8. Ensure the lamp is switched OFF before connecting to the mains power supply.

9. Be aware that some surfaces may become hot. Do not touch hot surfaces and supervise others accordingly.

10. This product has not been designed for use by children.

11. To protestosite let hole neal he lip, the main eat a plastic one into contact with water or any

12.  Never rect on the plate has bees legit a pid by a quite cely at the mains immediately and unplug.

13. Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and mains supply connections.

14. To disconnect, first ensure that all controls are in the OFF position, then remove the plug from the electricity supply.
    Where relevant keep all ventilation slots, filters, etc. uncovered and clear of debris. Never drop or insert objects into the

15. Do not use outdoors. This lamp has been designed for domestic indoor use only.

ADDITIONAL SAFETY PRECAUTIONS FOR LIGHTING

1. Carefully read all instructions for the assembly and use of this product before connecting to an electricity supply.
2. Use only the recommended bulb rating, as detailed on the lamp holder and / or label.
3. Never use a bulb that is rated more than the recommended capacity.
4. Light bulbs become very hot in seconds. Do not attempt to touch the bulb while the lamp is lit and supervise others accordingly.
5. Before cleaning or replacing a defective bulb, switch off the lamp and unplug from the mains socket. Allow the bulb to cool for at least 10 minutes before touching it and making the change.
6. Ensure the new bulb is secure in the holder before reconnecting to the power supply.
7. If in doubt, c onsult a qualified electrician.

Product Specification

• Rated Voltage: 220-240V ~ 50Hz
• Bulb requires : Max 25W E27 Edis on Screw (Not Included)
• CAUTION : Electric shock hazard.The external flexible cable, plug or the switch of this lamp cannot be replaced. If any of these parts are damaged, disconnect from mains power.
• The lamp should be destroyed. hot surfaces Before cleaning or replacing a defective bulb, switch off the lamp and unplug from the mains socket. Allow the bulb to cool for at least 10 minutes before touching it and making the change.

7 – 9W LED r ecom mended fo r medium brightness

INSTRUCTIONS FOR INSTALLATION:

1. Caution : Assemble the lamp completely before connecting to the electricity supply.
2. Loosen the Socket Ring (C).
3. Remove the cover of the lamp shade before using.
4. Install the Lamp Shade (B) to the Lamp Holder (A) and lock the Socket Ring (C).
5. Install the bulb-Max 25W E27 (not included) into the lamp holder.
6. Check to ensure that all the components have been assembled correctly.
7.  Connect to the mains supply.

12 Month Warranty

• Thank you for your purchase.

• Your new product is warrantied to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.
  For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

• We will provide you with your choice of a refund, repair (where possible) or exchange (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty.
  This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.

• Please retain your receipt as proof of purchase and contact our Customer Service Centre as listed below, for the entity you purchased this product from, for any diffiiculties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to the respective Customer Service Centre.

• Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Contacts

Contact for Kmart purchases| Contact for Target purchases
---|---
Kmart Australia Ltd.

C/- Customer Service Centre 690 Springvale Road,

Mulgrave Vic 3170

Customer Service: 1800 124 125

(Australia) or 0800 945 995 (New Zealand) or via

Customer Help at kmart.com.au

| Target Australia Pty Ltd

C/- Customer Service Centre

2 Kendall Street, Williams Landing, Vic, 3027

Customer Service: 1300 753 567 or via Customer Help at target.com.au/help /contact-us

References

• kmart.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>