Danfoss TS710 Single Channel Timer User Guide

: June 10, 2024
: Danfoss

Table of Contents

Danfoss TS710 Single Channel Timer
What is the TS710 Timer
Setting time and Date
Timer Schedule Setup
Display and Navigation Details
Documents / Resources

Danfoss TS710 Single Channel Timer

Danfoss-TS710-Single-Channel-Timer-product

What is the TS710 Timer

The TS710 is used to switch your gas boiler either directly or via a motorized valve. The TS710 has made setting your on/off times easier than ever before.

Setting time and Date

Press and hold the OK button for 3 seconds, and the screen will change to show the current year.
Adjust using or setting the correct year. Press OK to accept. Repeat step b to set month and time settings.

Timer Schedule Setup

The Advanced Programmable Timer Function allows setting a timer-con-trolled program for automatically scheduled event changes.
The example below for 5/2 day setup
a. Press the button to access schedule setup.
b. Set CH flashes, and press OK to confirm.
c. Mo. Tu. We. Th. Fr. will flash on the display.
d. You can select weekdays (Mo. Tu. We. Th. Fr.) or weekends (Sa. Su.) with buttons.
e. Press the OK button to confirm the days selected (e.g. Mon-Fri) The chosen day and 1st ON time are displayed.
f. Use or select ON hour, and press OK to confirm.
g. Use or select ON minute, and press OK to confirm.
h. Now the display changes to show the “OFF” time
I. Use or select OFF hour, and press OK to confirm.
j. Use or select OFF minute, and press OK to confirm.
k. Repeat steps f. to j. above to set 2nd ON, 2nd OFF, 3rd ON & 3rd OFF events. Note: the number of events is changed in the user settings menu P2 (see table)
l. After the last event time is set, if you were setting Mo. to Fr. the display will display Sa. Su.
m. Repeat steps f. to k. to set Sa. Su times.
n. After accepting Sa. Su. final event your TS710 will return to normal operation.
If your TS710 is set for a 7-day operation, the option will be given to select each day separately.
In 24-hour mode, the option will only be given to select Mo. to Su. together.
To change this setting. See user settings P1 in the User Settings table.
Where the TS710 is set for 3 periods, options will be given to select the period 3 times.
In 1 Period mode, the option will be only given for one ON/OFF time. See User Settings P2.

Display & Navigations

Danfoss-TS710-Single-Channel-Timer-
fig-2

To access additional features press and hold the button for 3 seconds.
To reset the timer, press and hold the PR and OK buttons for 10 seconds.
The reset is complete after ConFtext appears on the display.
(Note: This does not reset service due to timer or date and time settings.)

Holiday Mode

Holiday Mode temporarily disables the timing functions when away or out for a period of time.
a. Press the PR button for 3 seconds to enter Holiday mode. icon will be shown on the display.
b. Press the PR button again to resume normal timings.

Channel Override

You can override the timing between AUTO, AUTO+1HR, ON, and OFF.
a. Press the PR button. CH will flash and current timer function, e.g. CH – AUTO.
b. With channel flashing press buttons to change between AUTO, AUTO+1HR, ON, and OFF
c. AUTO = The system will follow programmed schedule settings.
d. ON = The system will remain constant ON until the user changes the setting.
e. OFF = the system will remain constant OFF until the user changes the setting.
f. a. AUTO+1HR = To boost the system for 1 hour press and hold the button for 3 seconds.
f. b. With this selected, the system will remain ON for an extra hour.
If it is selected while the program is OFF, the system will switch ON immediately for 1 hour and then resume programmed times(AUTO mode) again.

User Settings

a. Press the button for 3 seconds to enter the parameter setting mode. set the parameter range via or and press OK.
b. To exit parameter setup press, or after 20 seconds if no button is pressed unit will return to the main screen.

No.	Parameter settings	Settings range
P1	Working mode	01: Schedule timer 7 day 02: Schedule timer 5/2 day 03:
Schedule timer 24hr	02
P2	Schedule periods	01: 1 period (2 events)

02: 2 periods (4 events)

03: 3 periods (6 events)

| 02
P4| Timer display| 01: 24hr

02: 12hr

| 01
P5| Auto daylight saving| 01: On

02: Off

| 01
P7| Service due setup| Installer setting only|

Danfoss A/S
Heating Segment
danfoss.com
+45 7488 2222
E-mail: heating@danfoss.com
Danfoss can accept no responsibility for possible errors in catalogs, brochures, and other printed material.
Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are the property of the respective companies.
Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
www.danfoss.com