Dongguan Benny Electronic Technology BM9000 Wireless Mouse and Keyboard Combo User Guide
- June 6, 2024
- Dongguan Benny Electronic Technology
Table of Contents
BM9000
Quick Start Guide
Package contents:
-
Wireless Desktop
-
Nano Receiver
-
1 AA lAAAaikaline battery
-
Quick start guide
-
Warranty card
-
Open the battery case Insert the battery (pay attention the positive and negative position)
Note: Before use, please tear up the battery insulating protective film
|
---|---
2. Remove the receiver| 3. Insert the computer USB interface
Product features
Stable wireless transmission
2.4GHz wireless technology can provide a reliable connection and is not
subject to any interference in the 360 degrees within 30 meters.
Surface Compatible king
Unique “interface” focusing ability, high light ceramic tile, dust glass,
enhance the adaptability of the optical sensor
Then ordinary wireless power-saving five times
The industry’s top chip, Five times more power-saving than ordinary mice the
standby time up to 36 months
Waterproof Design which is Close to the chip
A large drainage hole at the bottom of the keyboard, the keyboard will not
cause a water short circuit may let your keyboard more long life.
Support more systems
Support Android system smart TV, set-top box, get rid of the remote control is
freer.
Data parameter
Basic:
Data transmission: 1Mbps
Frequency : 2403.65-2479.65MHz
Channel: 16
Engine: No optical
Distance: 30m
Voltage : 1.5V
Current : 11mA
Mouse Key life : Above 3 millions
Mouse Size: 100x60x38mm
Keyboard Size: 433x140x25mm
Step current:
Working current = 11 mA
Standby current = 1.3mA
Dormancy current = 50uA
No receiver state = 10-25uA
Tracking performance :
Mouse Resolution : 1500DPI
Mouse Rate of return: 250Hz
System requirement:
IBM or compatible computer
Windows: 2000/ ME/ XP(x64) /Vista / 7/ 8 /10
Mac OS X(More than V10.4)
Workable USB port
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, i pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can I radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information The device has been evaluated to meet general RF
exposure requirements. The device can be used in portable exposure conditions
without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>