CE LINK WPC15-1LCNB Wireless Charger User Manual
- June 9, 2024
- CE-LINK
Table of Contents
CE LINK WPC15-1LCNB Wireless Charger User Manual
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before using this product. Please keep this manual for reference in the future.
INTRODUCTION
This product is a wireless charging device in accordance with the QI protocol which is suitable for mobile phones, and other devices based on wireless charging 5W, 7.5W ,10W or 15w. Connect the wireless charger to a power supply and then you can charge your device which is supported wireless charging (mobile phones, etc) by put it on the wireless charger directly.
FEATURES
- Transmitting terminal input: 12V/2A,9V2A
- Transmitting terminal output: 5W/7.5W/10W/15W
- Compliant with CE, FCC standards
- It is light, smart and convenient to use
- Compatibility:
output1:iPhone12,iPhone12mini,iPhone12Pro,iPhone12 Pro Max, iPhone13,iPhone13mini,iPhone13 pro, iPhone13 Pro Max
SPECIFICATIONS
Input | Type-C: 12V/2A,9V2A (PD adapter) |
---|---|
Output | 15W Max |
Wireless Charging Frequenc | 112-201KHZ |
Operating Temperature Range | 0~30°C |
Storage Temperature Range | -20 ~ 40°C |
Operation Humidity | 10% ~ 80% RH |
Storage Humidity | 5% ~ 95% RH |
Size | Diameter:60mm,Thickness:18mm |
Weight | 80±10g |
PACKING LIST
Before using this product, please check the packing and make sure the following items are contained in the packing:
- Main unit×1
- User Manual×1
OPERATION GUIDANCE
Operation Procedures
- Connect the wireless charger to the power supply.
- Place your device (which supports wireless charging) on the wireless charger
- Please take out the device after it is fully charged.
Operation Notes
- For optimum performance, please use the wireless charger according to this user manual.
- Please connect the wireless charger to the power adapter. When you need 15W wireless output, the output capacity of your adapter should include 12V2A/9V3A.It is compatible with PD adapters.
- Please unplug the wireless charger after using.
- Do not use the wireless charger with an electronic product which is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
- It’s normal that wireless charger will be a little overheated in the use process.
- When the wireless charger stops working under some accidents, you need to check whether the device is compatible with this wireless charger.
- Do not let the wireless charger close to fire, such as stove, candlesand etc.
- Do not let the wireless charger soak into liquid, such as swimmingpool, bathtub, etc.
- Do not wash the wireless charger with corrosive cleaner.
- If the wireless charger does not work, please contact the local merchandise or dealer.
- Do not place metal objects on the back of the phone while it is rging wirelessly.
CONNECTION DIAGRAM
FCC Warning
This device complies with part 18 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
-
(a) Max. Electric Field Emissions: 0.9304V/m
Max. Magnetic Field Emissions: 0.7266A/m -
(b) The maintenance of the system is the responsibility of the manufacturer.
-
(c) To prevent interference, the product should be as far away from devices operating at the same frequency as possible.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>