STUDER NX Wifi Dongle User Guide
- June 9, 2024
- STUDER
Table of Contents
NX Wifi Dongle
User Guide
swiss made power
General Information
Exclusion of liability
Studer disclaims all responsibility and liability for damage, costs or losses
resulting from an installation that does not comply with the instructions, a
faulty operation or inadequate maintenance. The use of studer equipment is in
any case under the responsibility of the customer.
Read carefully the safety and operation instructions/Installation must be
entrusted to qualified personnel/Check the user manual online/Need help ?
https://technext3.studer-innotec.com
Installation
If a network is not supported, i.e. WEP or WPA-3, the network is grey.
The output power is restricted indoors, not applicable for outdoor application.
| Chipset | RTL8811AU |
|---|---|
| Standard | IEEE 802.11a/b/n/ac |
| Frequency | 2.412 GHz – 2.472 GHz |
5.15 GHz – 5.825 GHz
Data-Rate| 802.11b: up to 11 Mbps
802.11g: up to 54 Mbps
802.11n: up to 150 Mbps
802.11ac: up to 433 Mbps
Antenna| 1x External detachable dual-band
2.4 GHz + 5 GHz 2 dBi antenna
Connector| RP-SMA female
Channel width| 20 / 40 / 80 MHz
LED indicators| Power / WLAN
Working channel| 1–14 (2.4 GHz)
36-165 (5 GHz)
Output power| 18 dBi
Sensitivity| 802.11b: -85 dBm@11 Mbps
802.11g: -69 dBm@54 Mbps
802.11n: -68 dBm@150 Mbps
802.11ac: -59 dBm@433 Mbps
Security| 64 / 128 bit WEP
WPA (TKIP with IEEE 802.1x)WPA2 (AES with IEEE 802.1x)WPA Mixed
Operating temp.| 10°C ~ 60°C
Storage humidity| 5% ~ 98% (Non-condensing)
Dimension| 5.5 x 1 x 2.5 cm (L x H x W)
Call our specialists +41 27 205 60 80 or visit studer-
innotec.com/support
Studer Innotec SA
rue des Casernes 57
1950 Sion, Switzerland
info@studer-innotec.com
© All rights reserved
Studer Innnotec SA – V1