PHILIPS 2757760 Fluorescent Lamp Installation Guide
- June 9, 2024
- Philips
Table of Contents
PHILIPS 2757760 Fluorescent Lamp Installation Guide
Philips LEDtube
Packing list Philips LEDtube : 10 pcs EMP (to replace starter): available as accessories
| SYMBOL | MEANING |
|---|
| DO NOT USE WITH DIMMERS
| SUITABLE FOR 50Hz OR 60 Hz OPERATION
| NEED TO BE USED WITH LED REPLACEMENT STARTER EMP
| Li d4 4d 0 NEED TO BE USED IN DRY CONDITIONS OR IN A LUMINAIRE THAT PROVIDES
PROTECTION
-
No modifications of the luminaire which the LED lamp is to be used with are to be made
-
This lamp may not be suitable for use in all applications where a traditional fluorescent lamp has been used.The temperature range of this lamp is more restricted. In cases of doubt regarding the suitability of the application the manufacturer of this lamp should be consulted
-
This lamp is designed for general lighting service(excluding e.g. explosive atmospheres)
-
In this application, LED replacement starter is not used. -Always switch off the power supply before commencing work!
-
Philips LED tube should be installed by qualified professionals in accordance with relevant code.
-
Stick the Warning Sticker on the luminaire after the modifications has been made
2019 Sway HOI0Me Opignify
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract. is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. publication thereof does not convey nor Imply any license under patent or other Industrial or Intellectual property rights.
06/2019
www.philips.comiighting