Zhiyihong PFF040 Automatic Pet Feeder User Manual
- June 15, 2024
- Zhiyihong
Table of Contents
Zhiyihong PFF040 Automatic Pet Feeder
Product Information
Specifications:
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC approved for uncontrolled environment
- Minimum Distance: 20cm between radiator and body
Product Usage Instructions
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. To ensure safe usage, it is recommended to install
and operate the equipment with a minimum distance of 20cm between the radiator
and your body.
FAQs
-
What happens if I make changes to the device without manufacturer approval?
Making changes or modifications to the device without explicit manufacturer approval may void your authority to operate the equipment. -
What is FCC Part 15 compliance?
FCC Part 15 compliance means that the device meets the regulations specified by the Federal Communications Commission to ensure it does not cause harmful interference. -
What should be the minimum distance between the radiator and my body?
To comply with FCC radiation exposure limits, it is recommended to maintain a minimum distance of 20cm between the radiator and your body.
PRODUCT PARAMETER
- Product name : WIFI smart pet feeder
- Product Model : PFF040-WIFI model
- Product material : ABS+304 stainless steel
- Capacity :4L
- Weight : 1.45KG
- Voltage/current :5V/1A
- Adaptive particle diameter :6~10mm
- Serving weight : 8 ~ 10g(depending on grain size) Maximum
- serving size : 9 (maximum parameter can be set to 10 meals)
- Unexpanded dimensions (L W H MM): 180180200mm
PRODUCT OVERVIEW
- Upper cover
- Desiccant box
- Barrel body
- airframe
- Stainless steel bowl
- Plastic bowl
BOX CONTENT
BUTTON FUNCTION
- Left button: Record button, long press for 1 second emit “drop” sound to start recording, release will emit two drops “recording is completed, recording time is up to 10 seconds
- Middle key : Feed button, press one food at a time, the machine will play the recording when it is running (it needs to be re-recorded after the factory is restored)
- Right button: Reset button, long press the WIFT symbol button for 5 seconds, emit dripping sound to restore factory
FOR MORE INFO
Mobile mall download smart graffiti After downloading, please turn on WiFi and Bluetooth to enter the software
LED INDICATION
-
Right indicator light: blue indicates the normal state of the feeder
-
Fast blinking: On for 0.5 seconds. Off for 0.5 seconds. The WIF fast power distribution mode Indicates the default power distribution mode
-
Blinking slowly: blinks once every 2 seconds, indicating the APP hotspot network distribution mode
-
Steady on: The network connection is successful
-
Red indicates that the indicator feeder is abnormal
Grain foreign matter blocked need to clean out the grain mouth
Warm reminder:
- 4GWiFi is required to connect to the feeder
- The Bluetooth connection needs to be turned on
- It needs to be connected when it is plugged in
- The battery is in low power, please replace it in time. Do not mix new and old batteries or different types of batteries
- After use, remove the top cover, grain storage bucket and stainless steel bowl for cleaning.
- The body and surface of the base can be wiped with a rag.
- Do not put it into water for cleaning
- Do not use alcohol, toluene and other solvents to wipe the product to avoid damage
FCC Warnning
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>