AJAX ReX 2 Jeweller Radio Signal Range Extender Owner’s Manual

AJAX ReX 2 Jeweller Radio Signal Range Extender

Product Information

The ReX 2 Jeweller is a range extender that supports photo verification and is designed to work with an Ajax hub. It has two channels, Ethernet and radio, to transmit events and photos from connected devices to the hub. The range extender firmware can be updated over the air and it utilizes radio frequency hopping to prevent jamming attempts. It also has fast pairing capabilities with the security system using QR code. The ReX 2 Jeweller can transmit photos taken with the detectors of the MotionCam lineup and has a battery life of up to 38 hours in case of a power outage. It is tamper protected and can be remotely controlled and configured via the Ajax apps. With a maximum radio communication range of 1,700 meters in an open space, multiple range extenders can be connected to an Ajax security system to protect large-scale objects. Alarms are delivered in 0.3 seconds regardless of the number of devices connected, while the first photo taken with the MotionCam detector is delivered in 10 seconds.

Product Usage Instructions

1. Connect the ReX 2 Jeweller to an Ajax hub following the instructions provided in the Ajax user manual.
2. Ensure that the ReX 2 Jeweller and the Ajax hub are connected to the same network through a router.
3. If using Ethernet as the communication channel, connect the ReX 2 Jeweller to the network using an Ethernet cable.
4. To add the range extender to the system, open the Ajax app and scan the QR code on the ReX 2 Jeweller.
5. Assign a name and a room to the range extender within the Ajax app.
6. If necessary, the ReX 2 Jeweller can be turned off or reconfigured remotely through the Ajax app without visiting the facility.
7. Ensure that the ReX 2 Jeweller is placed within the maximum radio communication range of 1,700 meters in an open space to optimize its performance.
8. Monitor the Ajax app for alarms and photos transmitted by the connected devices through the ReX 2 Jeweller.

Radio signal range extender supporting photo verification.

• An Ajax hub is required for device operation. Find the detailed information on the device at the link:
• https://ajax.systems/support/devices/rex-2

Key features

• Two channels to transmit events and photos from connected devices to the hub: Ethernet and radio
• Range extender firmware update over the air
• Radio frequency hopping and transmitting all data via Ethernet in case of attempted jamming
• Fast pairing with the security system using QR code
• Transmitting photos taken with the detectors of the MotionCam lineup
• Up to 38 hours of battery operation in case of a power outage
• Enclosure protected with the tamper
• Remote control and configuring via the Ajax apps

Photo verification for large and complex facilities

The maximum radio communication range with connected devices is 1,700 meters in an open space. Up to 5 range extenders can be connected to an Ajax security system, allowing it to protect large-scale objects. Regardless of the number of devices connected to the range extender, alarms are delivered in 0.3 seconds. The first photo taken with the detector of the MotionCam lineup is delivered in 10 seconds (the exact time depends on system parameters).

Jeweller + Wings

Ethernet

Guaranteed delivery of alarms and photos

ReX 2 is equipped with four antennas and supports two radio protocols: Jeweller and Wings. The maximum radio communication range of each protocol is 1,700 meters in an open space. Jeweller transmits commands, events and alarms. Wings provides packet transmission of images, even when the signal strength is unstable and the communication fails. This is possible due to the built-in algorithms for checking and uploading data packages. Ajax two-way radio communication uses frames to synchronize device communication sessions, authentication to prevent spoofing, and encryption to protect against data theft.

Сommunication through steel and concrete

ReX 2 with OS Malevich 2.13 firmware transmits data to the hub via radio and Ethernet cable. The cable can be used as the only or additional communication channel. The hub and the range extender must be connected to the same network through a router for that. An Ajax security system does not limit the length of the cable. Thus, one system can cover such an object as an office center with underground parking, a metal sectional hangar or a warehouse complex of several buildings.

• Automatic switching between the channels in case of connection loss with one of them
• Data transmission protected by encryption

Quick installation

Connecting and configuring ReX 2 is a hassle-free process which saves the installer time. To add the range extender to the system, scan the QR code using an Ajax app, then assign a name and a room to the device. And if necessary, the range extender can be turned off or reconfigured remotely, without visiting the facility

Technical specifications

Technical Data Sheet: ReX 2 Jeweller

References

• ReX 2

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>