LISEN 2E746 Line Metal Magnetic Wireless Charging User Manual

LISEN 2E746 Line Metal Magnetic Wireless Charging

Thanks for choosing Lisen! To bring you a fantastic experience, please read the man­ual before using.

ACCESSORY LIST

PRODUCT PARAMETER

• MODEL
  2E746

• PRODUCT NAME
  Line Metal Magnetic Wireless Car Charger

• MATERIALS
  ABS+PC/ GLASS/ ALUMINUM ALLOY

• INPUT
  5V 2A 9V 3A

• OUTPUT
  SW/ 7.SW / lOW / 15W

• DIMENSIONS
  110MMX66MMX66MM

• WEIGHT
  132G

• APPLICABLE POSITION
  AIR VENT

• SUPPORT ROD ADJUSTMENT RANGE
  lOMM

• HOOK EXPANSION RANGE
  30MM

• COMPATIBLE AIR VENT BLADE WIDTH
  11-28MM

• COMPATIBLE AIR VENT BLADE
  THICKNESS
  <4.SMM

PRODUCT STRUCTURE

PRODUCT DESCRIPTION

1. It is equipped with a PD30W car charger.
2. The product comes with a LED li ght ring that turns on when it is powered on, and remains on when in use.
3. When a device is connected to the wireless charger, the LED light turns off and the cooling and fan functions turn on simultaneously.
4. When the phone is removed, the wireless charging function stops and the cooling and fan functions turn off, and the LED light ring turns on and remains on.

COMPATIBLE DEVICES

1. Earphones: Airpods Pro (with Magsafe battery compartment) / Airp- ods Pro 2nd generation
2. iPhone 12/13/14 series (naked ph- one)/with Magsafe phone case/ 3rd party phone case without Magsafe (requires the use of magnetic sheet , please refer to the following instructions)
3. Phones with wireless charging but not Magsafe compatible, require the use of a magnetic sheet (please refer to the following instructions)
4. Phones without wireless charging , require the use of a magnetic sheet (only has car bracket function, no wireless charging function)

INSTALLATION STEPS

Installation steps for the use of air outlet hook clips:

1. Loosen the fixing nut in a counter -clockwise direction
2. Insert the swivel ball into the bolt
3. Tiahten the fixing nut
4. turn the hook clip adjustment kn- ob counter-clockwise to adjust the hook length to the maximum.
5. If the support ring is obstructed, you can rotate the support ring to fit your air outlet.
6. If the size of your vent is small and the support ring is inconvenient to fit, the support ring may not be used.
7. Snap the hook clip into the air outlet of the car and turn the hook clip adjustment knob to lock the blade.
8. To remove, loosen the hook and clip adjustment knob and detach the holder from the blade. (The blades should be kept horizontal so that they are perpendicular to each other and to the surface of the air outlet)
9. When adjusting the angle of use, slightly loosen the nut and adjust it to a comfortable angle before tigh- tening the nut

Tutorial on the use of the lead mag- net

1. Open the tissue pack and wipe the back of the phone/case with a damp tissue first, then dry it with a dry tissue.
2. If the mobile phone (case) is made of glass or if you do not want to stick the magnet attractor directly to the mobile phone (case), you can use the PE film first, peel off the PE film and stick it on the back of the mobile phone/case in the centre.
3. If the mobile phone (case) is made of glass or if you do not want to stick the magnet attractor directly to the mobile phone (case), you can use the PE film first, peel off the PE film and stick it on the back of the mobile phone/case in the centre.

Hint: The uneven surface of mobile phone cases, liquid silicone cases, oil-painted cases and fabric leather cases are not suitable for this mag- netizer.

NOTE

1. About using non-standard car charger: please use QC3.0 or PD18W or above
2. Metal accessories (iron pieces, finger clasps) or credit cards can interfere with charging. Cases containing metal, such as Pitaka, Evutec and Spigen QNMP, will trigger foreign object detection and interrupt charging.
3. Using the phone for GPS navigation or listening to music while charging can significantly affect the charging speed. When using GPS applications, the power consumption may be higher than the charging speed.
4. It is normal to have slight heating during the use of the wireless charger, if you encounter serious heating, please suspend the use and contact our after-sales mailbox.

PRODUCT WARNINGS

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation .lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
• This equipment must be installed and operated with a minimum distance of 15 cm between the radiator and user body.

AFTER SALE SERVICE
Lisen always dedicates to bring great shopping experience for each customer. Please feel free to contact us if you have any questions.

support@LISEN.com

Shenzhen Xiangdangwen Technol- ogy Co., Ltd. ADDRESS: 106, 1/F, No.313-4 Building Huachang Road,Langkou Community Dalang Street Longhua District, Shen- zhen, China.

MANUFACTURE: Huizhou Yimai Elec- tronics Technology Co.Ltd.
ADDRESS: 3rd Floor, Building B, Huakai High-tech Industrial Park, Electronic City Road, Longxi Street, Boluo County.

Designed by LISEN Made in China
AMZLAB GmbH Laubenhof 23, 45326 Essen UKCA SERVICE LTD 21 Ellesmere Avenue,Worsley,Manches- ter,UK,M28 OAL

LISEN.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>