Mytrix 2.4GHz Wireless Vertical Mouse User Manual
- June 13, 2024
- mytrix
Table of Contents
Mytrix 2.4GHz Wireless Vertical Mouse
OVERVIEW
Specifications
- Mouse Model: C882
- Product Size: 1057559mm Product Weight: 92g
- DPI: 800-1200-1600
- Battery: Built-in 400mAh Battery Charging Time: About 3 Hours Charging Port: Micro USB port
2.4G Wireless Connection Steps
- Turn on the Power Key.
- Insert the USB receiver into the computer’s USB port.
- Wait for 5 seconds for the auto-recognition on the first-time connection.
Functions Introduction
-
DPI Sensitivity Setting
Three sensitivity DPI {Dots Per Inch) levels are available: 800 – 1200 {Default) – 1600 Switch between the 3 levels with the middle round button on the top of the mouse. -
Power On/Off
The mouse could be turned on and off with the power switch located at the bottom of the mouse. -
Sleep Mode
The mouse will automatically switch to sleep mode to conserve the battery life if no activity is detected in 2 minutes; Right or left click to wake the mouse from sleep mode.
Charging
To charge, please connect the mouse with the power source with the micro-USS
charging cable provided; The micro-USS port is located on the front of the
mouse. The charging indicator will stay lit while the mouse is charging. When
the charging light is off, it indicates the mouse has been fully charged.
Kindly Note: Please fully charge the mouse before first use.
System Compatibility
The mouse is compatible with Windows, Mac, 105, Linux, and Android systems.
Troubleshooting
Below are the basic troubleshooting methods for the device in case of occurrence. Please contact the Mytrix support team at cs@mytrixtech.com if you’re unable to resolve the issue.
| Malfunctions | The Possible Reasons | The Solutions |
|---|---|---|
| The mouse | 1. Low battery level. | 1. Please charge the |
| no does | 2. The power switch | mouse for at least 15 |
| respond | is turned off. | minutes. |
| 3. The USB receiver is | 2. Move the power | |
| not connected to the | switch to “ON” at the | |
| mouse wirelessly. | bottom of the mouse. | |
| 3. Make sure the | ||
| light at the bottom of | ||
| the mouse is bright. | ||
| Unable to | 1. The receiver is not | 1. Pull out the |
| --- | --- | --- |
| connect to | inserted correctly. | receiver and reinsert |
| the USB | 2. Low battery level. | it into the USB port; |
| receiver | Switch to test on | |
| another USB port. | ||
| 2. Please charge the | ||
| mou se. | ||
| The mouse | 1. The mouse may | 1. Move the mouse |
| pointer | not be in the optimal | closer to the receiver. |
| cursor is | receiving range. | 2. Please charge the |
| moved | 2. Low battery level. | mouse. |
| irregularly | 3. Dust and oil cover | 3. Use a wet cloth |
| or responds | the laser sensor at | clean the bottom of |
| slowly | the bottom. | the laser. microfiber |
| 4. The mouse DPI is | cleaning cloth. | |
| low. | 4. Adjust the DPI level | |
| from 800-1200-1600. | ||
| The mouse | 1. The charging port | 1. Please wait longer |
| cannot be | is not plugged in. | to check if the |
| charged | 2. The charging cable | charging indicator |
| malfunction; or it is | stays on. | |
| not plugged in | 2. Test and try a new | |
| correctly. | charging cable. | |
| 3. The power source | 3. Test and try | |
| malfunctioned. | another power | |
| source. |
ATTENTION
- A reflective surface or rough surface will affect the mouse’s performance.
- The receiver must be plugged into the USB port before using the mouse.
- Please use a dry and soft cloth to clean the mouse.
- Kindly Note: Please fully charge the mouse before first use.
- Please do not disassemble the mouse or the USB receiver; Please reach out to us at cs@mytrixtech.com if you have encountered any issues.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>