ESR C4DM-ADAE-C0S0CCLEH-HCv1 4G Hybrid Router Installation Guide

: June 9, 2024
: ESR

Table of Contents

Connection Interface
SIM Installation and Configuration
Read User Manual Online (PDF format)
Download This Manual (PDF format)

C4DM-ADAE-C0S0CCLEH-HCv1 4G Hybrid Router
Installation Guide

Content of the giftbox:
Device (LTE) x1, Power Adapter x1, Ethernet Cable x1, Wall Bracket x1, Quick Installation Guide x1
Indicator LED

INDICATOR	STATUS	DESCRIPTION
**** POWER		Steady White
OFF	Power OFF
******** Wi-Fi

| 4dB ≤ SINR < 9dB

| 9dB ≤ SINR < 16dB
****| | 16dB ≤ SINR
All Signal LEDs OFF| No Signal

Descripcition of the buttons

WPS| Press and hold this button for 5 seconds
The WPS pairing function will be active for up to 2min| Conected
---|---|---
Press and hold for 1 to 3 seconds| Turn on / off Smart Home
Restart| All LEDs on steady| Processing Reboot
All LEDs flashing| Processing Reset to defaults
All LEDs off except ON| Reboot execution accepted

Connection Interface

Power Switch
Power adapter Input DC-12V , 1,5 A
WPS Press the WPS button for 5 seconds to activate the WPS function
Press the WPS button for 1 to 3 seconds to turn Wi-Fi on and off on your device
RESET BUTTON : Press the button briefly once to restart the device
Press the button for 5 seconds to reintiate a reset default configuration
Ethernet WAN (1 GE WAN)
Ethernet LAN (3 GE LAN)
Phone FXS
JOIN BUTTON Press the button once to enable the Smart Home Function ( to page 6)
Mounting slot for Wall Bracket
sim Card Slot ( 2FF SIM )

SIM Installation and Configuration

Follow the steps below to install the device:

Insert the SIM card into the device in the exact orientation as illustrated below.
Insert the power cord into the power adapter socket of the modem; and plug the plug into the power. Enable the power option to start the modem.
Access the network by connecting an Ethernet cable to the LAN port of the device and the PC or connect wirelessly using the default SSID and Wi-Fi key. This information can be found on the bottom of the modem.

Configuration of the device
Follow the steps below to configure and activate the connection on yourdevice through the web interface:

Open the web browser and enter the default IP address: https://192.168.8.1
Enter the default username/password to access the web management interface.
Username: Telcel_Admin
Password: Telcel + Last 4 digits of the IMEI (for example, Telcel1234)

You can locate the IMEI on the product label on the device 3. You are now ready to configure the device settings from the Modem Statuspage.
For security reasons we recommend that you change your password to one of your preferences in the device configuration settings. Manage => User => New Password

Factory Reset
Factory reset is needed to remove the abnormal behavior.
NOTE: This process will remove and reboot your system. You need to reconfigure all your devices after a reboot.

Locate the reset button on the back of the modem.
Use a pen and hold the reset button (see sheet 3) for 5 seconds.
Release the reset button after 5 seconds when you see the power LED turn on.
The system will do a factory reset and after 5 minutes it will boot again.
Repeat the steps specified on sheet 4 to reconfigure the modem

Attention

This modem is a complex electronic device. A fall can cause serious damage.
Never try to open or to repair the device by yourself. Repairs must be performed by qualified personnel only; otherwise, the warranty will not be valid.
Do not expose the device to very high or very low temperatures.
Use only the 12V / 1.5A power adapter that comes with the device.

Did you know?
Smart mobile broadband is an open platform that includes multiple wireless networks for communication with smart meters like sensors, smart plugs, thermostat, cameras, etc.
Get connected and start your Smart Home journey
This product is developed to protect your privacy and to handle many different wireless protocols at the same time using the principles of open standards for communication.
Start:
After completing the SIM card installation and Internet access setup, you are ready to connect to your new smart home platform.

Download the app from Google Play or AppStore and follow the instructionsbelow and in the app.
Press the Join button (see sheet 3) once to enable the join and connection status on the modem.
Set up your smart home project Name the project

a. Name the project
b. Location
c. Time zone
d. Username FCC Statement
Any Changes or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

This device complies with FCC radiation exposure limits set forth for anuncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
Recycling Basics
Please dispose of the product properly at the end of its useful life. This is electronic waste that should be recycled accordingly.
All Rights Reserved
Heimgard Technologies AS assumes no responsibility for any errors that mayappear in this manual. Furthermore, Heimgard Technologies AS reserves the right to alter the hardware, software and/or specifications detailed in this document at any time without notice, and Heimgard Technologies AS makes no commitment to update the information contained herein. All trademarks listed herein are the property of their respective owners.
This DOCUMENT is protected by copyright with all rights reserved. No part ofthis publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Heimgard Technologies AS.
For México:
Operation of this equipment is subject to the following conditions: