Genius SP-HF500B Speaker User Manual
- June 9, 2024
- GENIUS
Table of Contents
Genius SP-HF500B Speaker User Manual
Connecting the SP-HF500B Speakers
- Place the speakers next the the monitor, one on either side.
- Connect the AC power cord (A) to a suitable AC outlet.
- Plug the satellite speaker cables (B) into the host speaker’s “AUDIO OUT” RCA jacks.
- Insert the 3.5mm plug (green) of the audio cable (C) into the sound card or other audio source.
Control Function:
- Power/ Volume: Turn the Volume button to turn on/off the system power and to control the volume level.
- Headphone Jack: Accepts a 3.5mm stereo mini-plug from headphone.
- Line in Jack: Accepts a 3.5mm stereo mini-plug form MP3 or other stereo devices.
- Tone: Control the sound response.
- 3D switch function: 3D, 3D + Bass.
WARNING:
- The apparatus shall not be exposed to dripping or splashing and that objects filled with liqudis, such as vases, shall not be placed on apparatus.
- Do not install this equipment in a confined or building-in space such as book case or similar unit, and remain a well ventilation conditions at open site.
- The mains plug/appliance coupler/direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily operable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>