FEELWORLD FT6 5.5 Inch Wireless Monitor Kit User Manual

FEELWORLD FT6 5.5 Inch Wireless Monitor Kit

Overview

Thank you for purchasing our wireless monitor kit. The kit is a set of touch- screen monitors with built-in wireless modules. It supports the resolution format of up to 1080P/60Hz in wireless mode. It comes with H.264 codec to enable clearer video and lower latency.
Full HD color LCD monitor, which adopts advanced integrated DSP circuits and energy-efficient IPS LED panel, delivers low power consumption and stable performance. The kit comes with HDMI input and output, reverse power(to cameras), touch screen, supporting 3D LUT and HDR. It is portable, user- friendly. A wide variety of advanced features is included, such as Histogram, Audio Meter, Focus Assist, False Color, Zebra Exposure, Anamorphic.
The kit comes with dual battery slot, you can use the power adapter or the external battery as power source.
To insure the best use of the unit, please read the user’s manual carefully
CAUTION

• This product should not be exposed dripping or splashing.
• Please place the wireless monitor on a flat with hard and stable surface.
• In order to reduce the risk of electric shock of fire, please do not expose the receiver/ transmitter to rain or moisture.
• Please avoid the heavy impact and drop onto the ground when move the product.
• The screen of this product is made of glass. Please do not drop the screen towards the ground. Keep away from injury if the screen is broken.
• Keep the product away from the heat source, and avoid the prolonged exposures to the sun as the LCD screen will be damaged.
• To avoid damaging the product, please do not take apart or repair the unit by yourself without the adjustable components in the unit.
• In order to better maintain the LCD screen and protect the cover, please follow the following ways to avoid damages.

1. Please refrain from using the hard objects to hit the screen.
2. Please do not force to wipe the screen.
3. Please do not use the chemical solutions to clean the screen.
4. Please do not spray any detergent on the screen.
5. Please do not write on the screen directly.
6. Please do not stick on the screen.
7. Please simply wipe with a clean soft cloth and make sure no water on the screen.

Special Notice

• The impact of radio waves (such as the following environment may cause the abnormal audio and video (blocked image, noise…etc.).
  • Transmit near the wall which is hard for the radio waves to get through.
  • Quite close to the refrigerator, metal fitment and appliances, or net to the crowded situation.
• This product has been tested and manufactured to comply with national electrical safety rules, however, there will be noise caused by the interference with other machines in rare cased. If the interference is happened, please keep a certain distance away from other machines.
• The product is susceptible to interference from 5GHz wireless local area network or other wireless devices.
• Optimal range between transmitter and receiver is between 1 meter and 30 meters with in line of sight indoor.
• It will take 30-40 seconds to boot the system before wireless communication start, the media receiver can not be operated during this time.

Features

• Transmission range up to 250m/800ft (Los);
• Ultra-low latency: 70ms;
• Up to 1080P60Hz;
• Support APP monitoring;
• Selectable channels to minimize interference;
• Both the TX monitor and RX monitor support HDMI IN and HDMI OUT, a second monitor can be working via HDMI LOOP OUT;
• Can work as a monitor alone if the wireless module is deactivated;
• 5.5 inches 1920×1080 full HD IPS screen with touch function;
• Support 3D LUT;
• Support HDR monitoring;
• A panoply of auxiliary functions, including histogram, focus assist and many others, enabling optimized exposure and focus;
• DC8V power out to power your cameras;
• Attachable sunshade ensure better viewing in bright sunlight.

Product Layout

Front Back

Button Instruction

POWER: Long press to turn on and off the power; short press to turn on and off the screen touch function
MENU: Long press to open the main menu and short press to open the shortcut menu. Rotate the wheel to select a menu item, press it again to open the corresponding menu function.

Interface (Bottom)

Type-C : For 3DLUT upload via type-c to USB and for firmware upgrade
DC OUT 8V: DC power output interface, polarity as the output power Barrel output for powering your camera with a separately available DC coupler via adaptor (NP-FW50 Sony & LP-E6
Canon&DMW-BLF19 Panasonic). More adapters coming soon.

Interface (Right)

• TX: Transmitter
• RX: Receiver
• HDMI IN: 1.4, HDMI signal input
• HDMI OUT: 1.4, HDMI signal output
• DC IN 12V: DC power input, polarity as the input power
• : 3.5mm earphone port output

Power Supply Way

• The rear cover of the monitor is equipped with F970 dual battery plates, which is applicable to F970 series of batteries.

  • Sony F970 battery plate for battery of Sony DV:
    Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530 series

  • Battery switching instruction

  • When the battery/batteries is/are placed in the battery slot(s), battery icon will appear on the upper right of the screen.

  • White battery icon: working; Gray battery icon: not working.

  • Double-tap the gray battery icon and it will be switched to a working state in about 3 seconds, then it will be turned white.

• Barrel (5.5mm outer, 2.1mm inner) at the right of the monitor, DC 7~24V Input.
  Remark: It is recommended to use standard original F970 batteries. Different specifications of the battery have different capability. The working time for the monitor will be different. Higher capability (working time) will be longer. Please take off the battery from the monitor if you don’t use the monitor in a long time.
  The battery not including, please purchase separately.

Mounting

There is a ¼-20 thread point on bottom can be easily connected to the hot shoe mount, tripod fixed installation.

Sunshade

First lock the Sunshade Frame ②with the monitor tightly ③.
Unfold the sunshade ①, and attach the Velcro part of the Sunshade to the Sunshade frame ②, make sure they are tightly secured, and then complete the sunshade installation ④.

Menu Operation Instruction

After the monitor is properly connected to the power supply, the indicator light is on (red). Press button to turn on the monitor power. The indicator light turns yellow. After inputting the HDMI signal, the indicator light turns from yellow to green.
After startup, short press Power Button to select to turn the screen touch function on or off.
After the TX monitor input the HDMI signal, the RX monitor will receive the signal from it. Swipe from the right side of the screen to left to access channel menu including switch, signal, 9 channels and WPS pairing. Long press until it turns red to turn off the wireless function.
Note: there are channel 10,11 for option.
WPS pairing:
When there is a need to replace the transmitter or receiver, please tap and hold WPS of both the transmitter and receiver about 1 second to enter the pairing mode, and wait for the pairing to success.

Directly touch the screen for menu operation (turn on the screen touch function)

1. Double tap the screen to start the main menu and tap the relevant option to enter the sub menu. You can select the needed option and tap “<” or “>” to enable or disable it. Exit the menu by taping the or tap away.
2. Swipe up to start the shortcut menu and select the relevant tool, then tap the “<” or “>” to enable it.
3. Swipe up and down to adjust the backlight on the left side of the screen (1/2 split screen) or volume on the right side of the screen.
4. Swipe from Right to Left to access the channel Menu. There are 9 channels for selection.
5. Tap away to exit.

Wheel Operation

1. When the menu is not displayed, directly rotate the wheel to backlight or volume adjustment. The wheel option can be set to backlight or volume in the menu .
2. Long press the MENU wheel to open the main menu (on the left side of the screen). Rotate the wheel to select the secondary function menu. After selecting it, press the wheel, then rotate the wheel to select or set the option function.
3. Short press the MENU wheel to open the shortcut menu (below the screen), rotate the wheel to select the shortcut menu option, press the wheel to directly turn on/off the function, if you press the parameter selection, repeat the above operation. The shortcut menu will automatically exit after about 5 seconds without operation.

RTSP Mode Operation

1. APP download (FEELWORLD Wireless)
   Android
   Enter the FT6 FR6 page at www.feelworld.cn, then get the APP (FEELWORLD Wireless) to download.
   iOS
   Please search “FEELWORLD Wireless” to download in APP store.

2. Power on transmitter and select the CH5-CH9.

3. Tap and hold the RTSP of transmitter about 3 seconds to enter the RTSP mode.(The RTSP frame shows black）

4. Open the APP of FEELWORLD Wireless, and connect the FT6 & FR6 Wi-Fi.

5. Navigate to the WLAN Setting page and select the SSID (AP), which starts with “FW” to connect. The SSID(AP) is shown on the top of the channel menu.

6. Input the password (12345678) and select “CONNECT”.

7. After the connection is successful, reopen the APP, enter the “FT6 & FR6” page to select the connection (the “Connection” icon shows red), then receive the real-time video.

8. Interfaces： Lock Screen, Brightness, Waveform, Focus Assist, Zebra, Frame Guides, Zoom, False Color, Monochrome, 3D LUT, Audio Meters, Settings, Image Capture, Video Recording, Return, Live Streaming.

9. Settings: Channel selection, channel scan, password setting.

Notes :

• Please contact sales person or local agent of FEELWORLD for upgrade files.
• If there are multiple transmitters are used together, please distinguish which transmitter’s Wi-Fi the smart-phone/iPad is connected to.
• Please switch the receiver to RTSP mode, which is the same to transmitter. After that, the receiver also can monitor as the same as the smart-phone/iPad.
• Connecting SSID (AP) will cause your Android devices to be unable to access the Internet.
• Please install the new version of APP requires removing the old version.
• APP does not support Android 6.0 and below.

Menu Function Instruction

The focus level and focus color items are displayed after the focus assist is turned on.
Focus Level| 1～10
Focus Color| yellow, red, green, blue, white
Audio Meter| OFF, ON
Zebra| OFF, ON
The zebra value item is displayed only after the zebra is turned on.
Zebra Value| 1%～100%
Monochrome| OFF, gray, red, green, blue
False Color| OFF, type 1, type2
Return| Please use the scroll wheel to return to the previous menu or click on the main menu directly
Nine Grid| OFF, ON
---|---
Safety Marker| OFF, 70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1
Center Marker| OFF, ON
Marker Mat| OFF, 16:9, 16:10, 4:3, 1.85:1, 2.35:1
The Marker Mat Alpha item is displayed after the Marker Mat is turned on.
Marker Mat Alpha| 0%, 25%, 50%, 75%
---|---
Marker Color| yellow, red, green, blue, white, black
Return| Please use the scroll wheel to return to the previous menu or click on the main menu directly
Scan Mode| Under Scan, Over Scan
---|---
Video Aspect| auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, stretch, user
Under the user , you can customize the Video Width (100% ~ 200%), Video Height (100% ~ 200%)
Anamorphic Mode| OFF, 1.25x, 1.33x, 1.5x, 2.0x, 2.0x mag
Auto Mirror| OFF, ON
Flip H| OFF, ON
Flip V| OFF, ON
Zoom Times| OFF, 100%～300%
Freeze| OFF, ON
Pixel to Pixel| OFF, ON
Return| Please use the scroll wheel to return to the previous menu or click on the main menu directly
HDR| OFF, HLG 2020, HLG 709, HLG P3
---|---
Lut Switch| OFF, ON
The Lut item is displayed after the Lut Switch is
| turned on.
---|---
Lut| SLOG2, SLOG3, LOGC, VLOG
Lut Import (Type-C)| After copying the 3D LUT file to the U disk and inserting it into the Type-C to USB connector, you can click the “<” or “>” key in the Lut Import(Type C) to import the 3D LUT file or rotate the wheel to import the 3D LUT file(up to 50 Lutes).
Color temp| 5600K, 6500K, 9300K, user Under the “user” item, the red, green, and blue values of the image can be adjusted.
Backlight| 1～100
Brightness| 0～100
Contrast| 0～100
Saturation| 0～100
Hue| 0～100
Sharpness| 0～100
Return| Please use the scroll wheel to return to the previous menu or click on the main menu directly
Wheel| Backlight, Volume After selecting the wheel option, you can click the “<” or “>” button in the wheel option, or rotate the wheel to select one of the shortcut keys to set it to the rotary wheel adjustment (when the menu is
---|---
| not displayed).
---|---
Language| 中文, English, 日本語, Deutsch, Français, Italiano, Español, 한국, Pусский
Transparency| OFF, low, middle, high
OSD Time| 5s, 10s, 15s, 20s, 25s, always
Touch| OFF, ON
Please short press the TOUCH button to turn on the touch function again after choosing turn off
Volume| 0～100
Mute| OFF, ON
Reset| OFF, ON
After selecting the reset option, you can click the “<” or “>” key in the reset option or rotate the wheel to restore the factory settings.
Firmware Update| After copying the update file to the U disk and inserting it into Type-C to USB connector, and then connect to the Type-C interface of the monitor, you can click the “<” or “>” key in the firmware update option or rotate the wheel to update.
Return| Please use the scroll wheel to return to the previous menu or click on the main menu directly
| Exit the menu
---|---

Technical Parameters

mirrorless camera)
HDMI Input/ Output Support Format| Wireless Transmission Turn on 480P,576I,576P,720P60/59.94/50,1080I50/59.94/60 1080p23.98/24/25/29.97/30/50/59.97/60
Wireless Transmission Turn off 480P,576I,576P,720P60/59.94/50,1080I50/59.94/60 1080p23.98/24/25/29.97/30/50/59.97/60
4K UHD 3840×2160p (30/29.97/25/24/23.98Hz) DCI 4K 4096×2160p (24Hz)
---|---
Power Input Voltage| 7～24V
Power Consumption| ≦18W
Unit Size (mm)| 148Lx103.5Hx41W (mm)
Unit Weight (excluding antenna)| 370g (TX) 370g (RX)
Mount Point| one ¼-20 thread point at the bottom
Working Temperature| -20℃～55℃
Storage Temperature| -30℃～65℃

Trouble Shooting

Only black and white or monochrome image:

1. please check saturation, brightness & contrast adjustment.
2. Please check “Monochrome” is in black, white or monochrome image or other condition.

NO Signal after power on

1. Check if signal cable connecting is in good condition.
2. Check signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.

No sound
Please confirm whether the volume control is turned on, and adjust the volume.

• If there are still other problems, please contact with our related technologists.
• As we are improving product features and product performance, so if there is any change on the specification without prior notice.

References

• Zhangzhou SEETEC Optoelectronics TechnologyCo.,Lt【Phone】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>