CE LINK WPC20-3TCNA Wireless Charger User Manual
- June 9, 2024
- CE-LINK
Table of Contents
CE LINK WPC20-3TCNA Wireless Charger User Manual
Wireless charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or using
this product. Please keep this manual for future reference.
1.0 INTRODUCTION
The fashion design, the TYPE – C – PD charging input design, this product keep your digital devices. it supports the magnetic suction wireless charging output, specifically for your business travel, meetings, adventure, camping, or travel and so on.
2.0 FEATURES
-
TYPE-C-PD Input: 9V/3A 12V/2.5A 15V/2A
-
Outputs:
Output1: Wireless charger 5W
Output2: Magsafe 5W/7.5W/10W
Output3: TYPE – C 5 w output -
Total output:20W
-
Input under-voltage protection
-
Output over-current protection
-
Compliant with CE,FCC,MFI
3.0 SPECIFICATIONS
4.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit×1
- User Manual×1
5.0 PRODUCT SHOW
6.0 OPERATION
Operation Procedures
a) Charge the power bank Connected to the charger
b) Charge the devices
Note: Operation Notes
- don’t let the product close to the fire, like an oven, candles and other high temperature.
- Don’t let the noise of infiltrating liquid products, such as swimming pool, bathtub, etc.
- Do not use corrosive detergent cleaning products.
- Do not remove, modified products.
FCC Warning
This device complies with Part 18 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
(a) Max. Electric Field Emissions: 0.4916V/m Max. Magnetic Field Emissions:
0.3228A/m
(b) The maintenance of the system is the responsibility of the manufacturer.
(c) To prevent interference, the product should be as far away from devices
operating at the same frequency as possible.
RF exposure considerations
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>