itel T1Neo True Wireless Half In Ear Earbuds User Manual
- June 9, 2024
- itel
Table of Contents
- itel T1Neo True Wireless Half In Ear Earbuds
- BEFORE USING THE PRODUCT
- PRODUCT OVERVIEW
- BASIC PRODUCT SPECIFICATIONS
- USING YOUR EARBUDS
- CHARGING YOUR EARBUDS & CASE
- CONTROLS
- CONSIDERATE HINTS
- EU DECLARATION OF CONFORMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
itel T1Neo True Wireless Half In Ear Earbuds
PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE USING THE PRODUCT
PACKAGE CONTENTS
- True Wireless Half In-Ear Earbud x 2
- Charging Case x 1
- Type-C Charging Cable x 1
PRODUCT OVERVIEW
- Right Earbud
- Left Earbud
- Case Status Indicator
- Type-C Charging Port
- Multi-Function Force Sensor
- Earbud Status Indicator
- Microphone
BASIC PRODUCT SPECIFICATIONS
- Earbuds
- BT version: V5.1
- Talk range: 10m / 33ft
- Weight : 3g (each earbud)
- Music play time: Up to 4 hours
- Talk time: Up to 4 hours
- Battery capacity: 25mAh (each earbud)
- Charging Case
- Weight: 29g
- Charging time: Approx. 3 hours
- Battery capacity: 300mAh
USING YOUR EARBUDS
-
Turn On & Pairing
Earbuds will turn on and enter pairing mode automatically when taken out of the charging case.- For itel P36 & P36 Pro LTE, a pairing window will pop up at the first time of connection.
* For other mobile devices,
* Make sure the distance of the earbuds and your device is less than 10 metre / 3.3 feet at the first time of connection.
* Earbuds will automatically connect to the last connected device when turned on. The pop-up window will show the earbuds power status.
* Under any abnormal condition, return the earbuds to the charging case and then take out again.
-
Turn Off
The earbuds turn off automatically when placed back into the charging case.- The earbuds will automatically turn off after 3 minutes if no device is connected.
CHARGING YOUR EARBUDS & CASE
Earbuds will be charged automatically once they are returned to the charging case.
- **Charging The Earbuds
**
- **Charging The Case
**
* Use the included Type-C USB charging cable to charge the case.
* To preserve battery lifespan, fully charge at least once every 45 days.
CONTROLS
ATTENTION
- Use original or certified cables
- Do not expose to liquids
- Do not disassemble
- Avoid dropping
- Avoid extreme temperatures
- Do not use the product outdoors during a thunderstorm
- Do not use any corrosive cleaner/oil to clean
CONSIDERATE HINTS
- Do not turn up the volume to a fair high level constantly as this could shorten the service life of this product or impair your hearing.
- When encounter any fault during operation, please cut off the power supply and disconnect the USB cable to prevent further damage to the product or other components.
- The wireless transmission range or connectivity could be affected by low battery power. In that case, please recharge immediately.
CAUTION
- Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.
- Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- The product shall only be connected to a USB interface of version USB 2.0.
- EUT Temperature: 0℃~+45℃(Standalone).0℃~+40℃(with adapter).
- To prevent possible hearing damage, do not listen at high volume levels for long periods.
- USB cable is shielded.
EU DECLARATION OF CONFORMITY
- For the following Radio equipment:
- Model: T1 Neo
- Product: TWS Earphone
- Trade name or Brand: itel
- Software / Hardware number: 5.1/ V1.0
- Name and address of the manufacturer or his authorized representative:
- Manufacturer: ITEL MOBILE LIMITED
- Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT
- This declaration of conformity is issued under the sole responsibility of the Manufacturer.
- Object of the declaration (identification of the radio equipment allowing traceability; it may include a colour image of sufficient clarity where necessary for the identification of the radio equipment):
- The object of the declaration described above is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU (RED)
- References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:
- Article 3.1a Health: EN 62479: 2010
- Article 3.1a Electrical Safety: EN62368-1:2014+A11:2017
- Article 3.1b: ETSI EN 301 489-1 V2.2.3 (2019-11)
- ETSI EN 301 489-17 V3.2.4(2020-09)
- Article 3.2: ETSI EN 300 328 V2.2.2 (2019-07)
- Notified Body Name: Eurofins Electrical and Electronic Testing NA, Inc.
- Notified Body Number: 0980
- Notified Body Assessment Performed: Module B/C on Article 3.1a, 3.1b, 3.2 and 3.3
- Technical File Identification Number: N/A
- Where applicable, description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity: User instructions are provided in the User Manual. The Software and Hardware versions are specified above.
- Additional information:
- Referring to Article 10.2 of the Directive, this equipment is so constructed that it can be operated in all Member States, without infringing applicable requirements on the use of radio spectrum.
- Referring to Article 10.10 of the Directive, there are no restrictions on putting this equipment into service or of requirements for authorization of use. Please refer to the User Manual for details.
- On behalf of:
- Manufacturer: ITEL MOBILE LIMITED
- Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT
(Place and date of issue):Shenzhen, 2021-12-16
(Name, function): Yiting,Luo/ Manager
(Signature):
(Name and signature of person responsible)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>