BOULT AUDIO X45 True Wireless Earbuds with Case User Manual

BOULT AUDIO X45 True Wireless Earbuds with Case

Know your X45

What’s in the box?

• True wireless earbuds case 2 earbuds
• USB Charging Cable
• User Manual
• Warranty card
• Extra pair of extra tips

Product specification

• Product Name – TWS Bluetooth Headset
• Model – Bault Audio X45
• Bluetooth Version V5.3
• Speaker – 13mm
• Bluetooth Range: >10m/33ft (without any obstacles) Earbuds Charging Time 0.5 Hours
• Case Charging Time: J.5 Hours
• Frequency Range: 20Hz-20KHz
• Technology: HSP /HFP / A2DP / AVRCP
• Input: DC5V=lA

How to use your X45?

• Power on/off

  • Power on: Press & hold on the left/right earbud’s MFT for 2 seconds
  • Power off; Press & hold on the left/right earbud’s MFT for 5 seconds

• Connect
  To connect earbuds, open the charging case, search and connect with Boult Audio Airbass” in your mobile Bluetooth settings. You will hear connected sound once earbuds are connected with your mobile. From the next time whenever you open the charging case, earbuds will automatically connect back with previously paired phone. If it doesn’t connect automatically, go to mobile Bluetooth settings, search for the device name ·scull Audio Airbass· and then pair your device.

• Play/Pause Music

  • Single tap on left/right earbud’s MFT
  • Play previous song: Double tap on left earbud’s MFT
  • Play the next song: Double tap on right earbud’s MFT

• Calling

  • Receive: One tap on left/right earbud’s MFT
  • End call: Double tap on left/right earbud’s MFT
  • Reject calls: Double tap on left/right earbud’s MFT

• Voice Assistance
  Long press on left/right earbud’s MFT for 3 seconds

• Low Battery Warning
  When the battery of the earbuds runs low, there’ll be a beep to remind you. The earbuds will automatically turn off when they run out of power.

• Charge Earbuds

  • Place your earbuds in the charging case and close the lid.
  • The earbuds will automatically start charging.

• Reset
  If your earbuds accidentally only get one earbud to work, or fail to pair, please reset the earphone.

1. Delete all”‘Boult Audio Airbass'” Bluetooth records on the phone, and turn off Bluetooth
2. Put earbuds into charging case, and then take out to pairing modes, tap L & R MB 5 times simultaneously, hear “DU” prompt voice to clear all pairing.
3. Put earbuds into charging case.

Signal Transmition Distance

Do’s & Dont’s

• Do not use corrosive detergents to clean the product.
• Store the product in a dry environment & charge the earbuds’ case at least once a month.
• Please raise the volume to the appropriate level while using the product. High volume may cause a risk of hearing loss.
• Do not dismantle or use the product near fire or in high­temperature environment. If expansion occurs, discontinue using the product.

Maintenance Instructions

• Warranty is valid/invalid only basis of the below criteria:
• The product should be purchased through legal and formal channels to be applicable for warranty.
• Damaging the product intentionally/unintentionally, or due to natural disasters, etc. is not covered in the warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>