Guangdong Syma Model Aircraft Industrial TG1009 Fire and Rescue Stunt Vehicle Instruction Manual
- June 5, 2024
- Guangdong Syma Model Aircraft Industrial
Table of Contents
Guangdong Syma Model Aircraft Industrial TG1009 Fire and Rescue Stunt
Vehicle
Thank you for purchasing one of our toy products. To ensure that you get the most out of your new purchase, please read these instructions carefully before using the toy for the first time. They contain important information on how to operate the product
Inserting the remote control batteries
Remote control
- Check the ON/OFF switch is in the “OFF position
- Use a screwdriver to loosen the screw
- Remove the battery cover
- According the polarity indicated inside in the remote control. Put the 2″AA battery into the battery compartment
- Put the battery cover back and tighten the screw
Remote control car
- Check the ON/OFF switch is in the “OFF position
- Use a screwdriver to loosen the screw
- Remove the battery cover
- Install the battery as indicated in the picture on the right
- Connect the rechargeable battery in the battery pack as indicated in the picture.
- The version of the AA battery must be guaranteed insert in the correct place.
- Put the battery cover back and tighten the screw
Care and maintenance
- Remove the batteries when you do not plan to use the toy for an extended period.
- Wipe the vehicle clean, with a damp cloth.
- Do not expose the toy to high temperatures, moisture or direct sunlight.
- Do not immerse the toy in water, as this may damage the electrical components
- If the wheel is too dirty or rolls inflexibly, this may influence the operation experience
- Please check it and clear up the foreign matters.
Caution
- When the wheels of remote control car is rolling, Do not touch it in order to avoid injury of yourself or damage of the car.
- Please do not play by the road or in dangerous places in case of accidents.
- Avoid operating the vehicle in the rain or grinding the remote control vehicle over the puddle in case of breakdown.
- Avoid operating the vehicle alongside the river, lake or pond in case the remote control or remote control vehicle fall into the water.
- If recharging is unnecessary, please take the battery out of the remote control vehicd
- The car will get a poor rolling effect if play on the carpet and remote control.
Introduce the function of the remote control and the vehicle
Using the vehicle
- Switch on the vehicle using the ONOFF switch.
- Switch on the vehicle ON/OFF switch, make the frequency of the remote control and remote control
- vehicle match each other,then you can operate the remote control vehicle.
- Switch off the vehicle and remote control after use.
- The playing time is about 20 mins.
- The control rang is about 30 meters, if out of 30 meters rang. it may lose control.
Caution: in order to avoid losing the remote control vehicle or making it lose control, follow the following steps all the time:
- Tum on the remote control.
- Tum on the remote control car
- Turn it off according to the opposite steps.
Charging the batteries
Sketch Map of the Recharging in A Vehicle Battery
Battery charging
- Insert the USB charging into the socket. Insert the battery plug into the plug of the USB cable. (Pay attention not to confuse the positive and negative polarity.)
- A full charge takes 150 minutes. When charging the LED indicator turns into red,when charging is complete,the LED indicator stays off.
- Regularly inspect the toy, battery charger, charging cable, connectors and other components for signs of damage. In the event of any damage, discontinue use and send the parts for repair.
- In case of abnormal responses such as suspicious peculiar smell, noise or smog in the charger,please remove the power supply at once
- Please recharge with the dedicated USB delivered by the original factory. Never use broken USB or USB of other brands.
- Please do not recharge the swelling, leaking or broken battery.
- Please do not overcharge the battery. When the battery is fully recharged, please pull out the charger.
- Please do not recharge on the surface of the objects near inflammable things(carpet, wood floor,solid wood furniture, etc.) or of conductive things. While recharging. please keep the battery within the range of visibility.
Battery safety information
- The batteries must only be charged under adult supervision.
- Before charging the batteries, remove the battery compartment from the vehicle chassis.
- Remove empty batteries from the vehicle and remote control.
- Ensure that the vehicle is switched off before inserting the batteries.
- Install the battery according to the instruction inside the battery box. Make sure not to confuse the positive and negative polarity of the battery.
- Do not attempt to charge non-rechargeable batteries.
- Do not short circuit the battery terminals
- If you do not plan to use the vehicle for an extended period, remove the batteries from the vehicle and remote control to prevent leakage.
- Do not throw batteries into open flames, as this may cause them to explode or leak.
- Do not mix old and new batteries or batteries from different manufacturers
- Only use batteries from recommended or reputable manufacturers.
- Regularty inspect the batteries for signs of leakage.
- It is suggested not to use more than 3 betteries for one single play.
- If leaking occurs in the battery, please avoid touching the liquid with the skin and eyes.If it touches the skin. please clean the skin with soap and clean water at once. If it touches the eyes. please wash the eyes with a lot of cold water at once and see the doctor right away
- This equipment is composed of electronic components and battery. The electric apliance garbage should be given special care according to the local requirements for garbage disposal
- Keep this instruction manual in a safe place for future reference. It contains important information on how to use the product safely.
Function and operation of the product
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio requency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. RF frequency band: 2408.5MHZ – 2468.5mhz EIRP:8.91 dBm (For EU)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>