JONATHAN Y JYL6401 Bronze or Clear Single Light 13 Inch W LED Pendant Instruction Manual
- June 9, 2024
- JONATHAN Y
Table of Contents
JONATHAN Y JYL6401 Bronze or Clear Single Light 13 Inch W LED Pendant
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
- Fix the mounting bracket(B) to the outlet box with machine screw(C).
- Make wire connections, with wire connectors(D), following the reference chart listed below.
Connect, Hot, Black or Red Outlet Supply Wire to:| Connect, Neutral, White Outlet Supply Wire to:
---|---
Black| White
- Parallel Cord (round & smooth)| Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes)| Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor| Insulated Wire (not green) with Silver metal conductor.
| Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet
box around green ground screw on mounting bracket, no less than 2″ from wire
end. Tighten ground screw. If fixture is supplied with a ground wire, connect
to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire,
wrap ground wire around green grounding screw on mounting bracket. Tighten
ground screw.
- Orient the ceiling canopy(G) so that the mounting screws(A) protruding from the mounting bracket go into the holes in the canopy,then secure it with the provided screwed balls(E).
- Connect the tubes(H) together to get desired length and fix the bottom end to ring nut(I) on the top of glass, the top end to the canopy.
- Install bulb(J). Be sure to use light bulb(s) with wattage no greater than specified on this fixture. Always make sure that electrical current is turned off before changing bulbs.
PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR CFL BULB MAX13 -WATT OR LED BULB MAX9 -WATT THERE ARE LED 1PCS 4-WATT BULB IN THE BOX
ENJOY YOUR LAMP
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
To clean the outside of the fixture, use a dry or slightly dampened clean
cloth (use clean water, never a solvent) to wipe
the surface of the fixture. To clean the inside of the fixture, first
disconnect power to the fixture by turning off the circuit breaker or by
removing the fuse at the fuse box. Next, use a dry or slighly damperned clean
clorth (use clean water, never a solvent) to wipe the interior surface of the
fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a
dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this luminaire cannot be replaced
If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE
| DESCRIPTION| PICTURE| QUANTITY| PIECE| DESCRIPTION|
PICTURE| QUANTITY
---|---|---|---|---|---|---|---
A| mounting screw| | 2 X| F| ground screw| |
1X
B
| mounting bracket| | 1X| G| canopy| 
|
1X
C
| machine screw| | 2X| H| tube| | 12“ – 2X 6″ – 2X
D| wire connector| ****| 3X| I| glass with ring nut| |
1X
E
|
screwed ball
| ****|
2X
|
J
|
bulb
| ****|
1X
Documents / Resources
|
JONATHAN Y JYL6401 Bronze or Clear Single Light 13 Inch W LED
Pendant
[pdf] Instruction Manual
JYL6401, Bronze or Clear Single Light 13 Inch W LED Pendant, JYL6401 Bronze or
Clear Single Light 13 Inch W LED Pendant, Single Light 13 Inch W LED Pendant,
13 Inch W LED Pendant, W LED Pendant, Pendant
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>