SECO-LARM SM-205Q/BR Miniature Surface-Mount Contacts User Manual
- June 6, 2024
- SECO-LARM
Table of Contents
SECO-LARM SM-205Q/BR Miniature Surface-Mount Contacts
Features
- Miniature “flange-type” surface-mount magnetic contacts perfect for sliding doors and windows where space is limited
- Screw or adhesive mount
- Mounting flange breaks off for extra miniature size
- High-impact weatherproof ABS plastic case
- Contact reed switch is SPST, deactivated rhodium on gold underplating for a longer expected life
- For closed loop circuits
- 3/4″ (19mm) Gap
- 15″ (38cm) Wire leads extend from side of switch
- Double-sided tape included
- Lifetime limited warranty
Parts List
10x
| Contact Switches| 10x| Magnets
---|---|---|---
2x| Mounting tape| 1x|
Manual
Installation
Please read the manual carefully before starting installation.
- Mount the contact above the door or window on the frame and farthest from the hinged side if a door.
- Connect two wires to the contact terminals and to the alarm control panel.
- Mount the magnet on the door/window facing the contact and with a gap between them not exceeding 3/4″ (19mm).
Specifications
Model
| SM-205Q/W|
SM-205Q/BR
---|---|---
Loop type
|
Closed loop
Electrical configuration
|
N.O. (SPST)
Operation gap
|
3/4″ (19mm)
Connectors
|
15″ (38cm) Leads from side
Color
|
White
|
Brown
Material
|
Case
|
High-impact ABS plastic
Contacts
|
Deactivated rhodium on gold underplating
Contact rating
|
1.0A@10VDC (max.)
10W (max.)
Operating temperature
|
-15°~160° F (-25°~70° C)
Switch cycles
|
50 Million (0.1mA@5VDC)
Dimensions
|
Switch
|
11/4″x5/16″x1/4″ (32x8x6 mm)
Magnet
|
11/4″x5/16″x1/4″ (32x8x6 mm)
Magnet type
|
Alnico 5
Contact and magnet must be installed on the protected side of the door/window.
California Proposition 65 Warning: These products may contain chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
LIFETIME LIMITED WARRANTY: This SECO-LARM product is warranted against
defects in material and workmanship while used in normal service for the
lifetime of the product.
SECO-LARM’s obligation is limited to the repair or replacement of any
defective part if the unit is returned, transportation prepaid, to SECO-LARM.
Under no circumstances will SECO-LARM be responsible for any costs or charges
for removal, installation, or reinstallation. This Warranty is void if damage
is caused by or attributed to acts of God, physical or electrical misuse or
abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty
installation, or if for any other reason SECO-LARM determines that such
equipment is not operating properly as a result of causes other than defects
in material and workmanship. The sole obligation of SECO-LARM, and the
purchaser’s exclusive remedy, shall be limited to repair or replacement only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special,
collateral, incidental, or consequential personal or property damages of any
kind to the purchaser or anyone else. This lifetime limited warranty is for
products sold and installed in the United States and Canada. For all other
countries the warranty is 1 (one) year.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
SECO-LARM ® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: 949-261-2999 |
800-662-0800
Email: sales@seco-larm.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>