Pro-Ject Debut III Carbon Turntable User Guide
- June 9, 2024
- Pro-Ject
Table of Contents
Debut III Carbon Turntable
User Guide
Debut III Carbon Turntable
Getting started:
- Make sure to have enough space to unpack your turntable.
- Always unpack and set up in a clean enviroment.
- Please Do NOT throw away the packaging! If you need service or want to return your product, please send them in the original packaging including all inserts. In case of any damage in another packaging your dealer cannot guarantee a full refund.
- Setup is demonstrated with Debut III
-
Unpack all items from accessory bag.
a) RCA cable
b) Standard flat belt for 33/45 RPM
c) Cartridge alignment protractor
d) Round belt for 78 RPM
e) Anti skating weight
f) Adapter for 7“ singles,
Allen key 1.5mm for azimuth setting -
Remove dust cover carton from the box.
-
Lift the wrapped turntable out of the box.
-
Carefully remove the protection covering.
-
Unpack the counterweight.
-
Unpack the power supply.
-
Unpack the platter.
-
Put the flat drive belt on the small pulley and sub-platter.
-
Put the platter & feltmat on the turntable.
-
Remove tonearm twist tie.
-
Screw the counterweight in place.
-
Remove the stylus protection cover.
-
Put a record on the platter.
-
Place the tonearm between platter and armrest.
-
Balance the tonearm so it stays level by turning the counterweight forwards and backwards on the rod.
-
Turn the front dial of the counterweight (not the whole weight) so the ‘0’ is in line with marker at the back of the tonearm.
-
Turn the whole counterweight counterclockwise until the scale reads 18 – 20.
-
Put the loop of the Anti Skating Weight in the second groove on the tonearm post.
-
Plug in power supply.
-
Unpack dust cover and put it on the turntable.
-
Use the rocker switch on the bottom left to select the playback speed.
-
How to connect the different models + possible sets on the backside of this sheet.
How to connect your model and possible setups:
Debut III , Debut III Esprit
Connect to any amp with integrated phono amplifier or use an external phono
preamp.
RCA Cable included.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and Pro-Ject MaiA
(stereo integrated amplifier). 
Debut III Phono
Select Line Out to connect to an amplifier without a phono stage. Select Phono
Out if you have an amplifier with a phono stage.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and Pro-Ject Stereo
Box (stereo integrated amplifier). 
Debut III Phono BT
Choose Line Out to connect to an amplifier without a phono stage. Phono Out if
you have an amplifier with a phono stage.
BT pairing
E1 BT is paired automatically with any device with BT receiver. For restart of
the BT transmitter, please turn OFF and ON the BT module by using the switch.
BT switch is located on the right side under the chassis. Restart is needed
only when there is a change of the BT receiver.
Possible set: Pro-Ject Speaker Box
5 (bookshelf speaker) and Pro-Ject Stereo Box (stereo integrated amplifier).
23 Enjoy some music!
(Remove dust cover for best playback expierience.)
Debut III
Need help?
Feel free to contact us. We have experienced partners all over the world. Find
your dealer here: www.project-audio.com/en/find-a-dealer/
Service
Should you encounter a problem which you are not able to alleviate or identify
despite the above information, please contact your dealer for further advice.
Only when the problem cannot be resolved there should the unit be sent to the
responsible distributor in your country.
Warranty repairs will only be affected if the unit is returned correctly
packaged. For this reason we recommend keeping the original packaging.
Never return a record player without making sure that is it safely
disassembled and correctly packaged in the original packaging according to the
diagrams on the last page of this user guide. Please remove these parts and
pack them separately: lid, counterweight, anti-skating weight and belt.
Fit the cartridge protection cap and the transport lock for the tonearm tube,
prior to carefully packaging the record player.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons, release the manufacturer from any liability over and above the lawful rights of the customer.
Warranty: Terms and Conditions
- A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.
- This warranty offer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which affects your original warranty).
- Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.
- A warranty is only valid for the original owner. It is not transferable.
- To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.
- Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.
- The legal warranty obligation exists in addition to this warranty and is not limited by this warranty.
A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:
- Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads, drive belts and cartridges.
- Damages caused by incorrect installation, connection or packing.
- Damages caused by any use other than the correct use described in the user manual, negligence, modifications, or use of parts that are not made or authorized by Pro-Ject Audio Systems.
- Damages caused by faulty or unsuitable ancillary equipment.
- Damages caused by accidents, lightning, water, fire heat, war, public disturbances or any other cause beyond the reasonable control of Pro-Ject Audio Systems and its appointed distributors.
- Products where the serial number has been altered, deleted, removed or made illegible.
- Repairs or modifications that have been executed by an unauthorized person.
Commercial Use
Faults caused due to using domestic products in commercial environments or on
commercial scales are not covered by warranty. This turntable is intended for
domestic use only. Using them for business applications are done so at your
own risk.
Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright © 2022. All rights reserved.
The information, pictures and figures were correct at the time of going to
press. The manufacturer reserves the right to make changes to the technical
specification without prior notice as deemed necessary to uphold the ongoing
process of technical development.
References
- Overton
- Find A Dealer – Pro-Ject Audio Systems
- Find A Dealer – Pro-Ject Audio Systems
- Find A Dealer – Pro-Ject Audio Systems
- Pro-Ject Audio