MIBOXER Zigbee 3.0 + 2.4G CCT LED Lamp Instruction Manual
- June 9, 2024
- MiBOXER
Table of Contents
Zigbee 3.0 + 2.4G CCT LED Lamp
Subordinate New Brand
CCT LED Lamp (Zigbee 3.0 + 2.4G) Instrucon Manual
Contents
Product features …………………………………………………………………………… 2 2.4G RF remote control
instrucon ……………………………………………. 3-4
Link / Unlink Instrucons …………………………………………………………… 3 Compable with remote
…………………………………………………………… 4 Auto transming …………………………………………………………………….. 4 “Do
Not Disturb” mode is acvated and shut down …………………….. 4 Smartphone app control
instrucon ……………………………………………… 5 Philips Hue control instrucon
………………………………………………………. 6 Alexa voice control instrucon ………………………………………………………..
7 Google home voice control instrucon …………………………………………… 8 Aenon
……………………………………………………………………………………… 9
Product features
Made by new Zigbee 3.0 wireless transming technology with low power consumpon,
strong ability to build network automacally and an-interference. with MiBoxer
Zigbee gateway to get wireless dimming color temperature and brightness,
remote control, ming control, group control, music rhythm funcon. Support 2.4G
RF remote control.
Color temperature adjustable
Dim brightness
Follow Zigbee 3.0 standard protocol
Zigbee 3.0
Support Zigbee 3.0 remote control (Zigbee 3.0 gateway is needed)
Support 2.4G Remote control
Auto transming
Support Smartphone app control (Zigbee 3.0 gateway is needed)
Support third party voice control (Zigbee 3.0 gateway is needed)
Various control soluon:
Powered b
Philips
MiBoxer
IKEA
Hue Zigbee Gateway TRÅDFRI
2.4GHz Amazon Remote Echo Plus
2
2.4G RF Remote control instrucon
1). Linking Code Instrucons
Power
Light
Link / Unlink buon
Power
Light
1
Power off and power on again aer 10 seconds.
2
Short press ” I ” buon 3 mes within 3 seconds.
3
Lights blink 3 mes slowly means linking is done successfully.
Linking failed if light is not blinking slowly, Please follow above steps again. (Note: Light that have linked can’t link again)
2). Unlinking Code Instrucons
Power
Light
Link / Unlink buon
Power
Light
1
Power off and power on again aer 10 seconds.
2
Short press ” I ” buon 5 mes within 3 seconds
3
Lights blink 10 mes quickly means unlinking is done successfully.
Unlinking failed if light is not blinking quickly, Please follow above steps again. (Note: Light haven’t linked that don’t need to unlink)
3
3). Compable with these 2.4G RF remote controls (Purchased separately)
FUT006 FUT007 B1 / B1-B / T1
B2 / T2
K1 / K1-B
FUT087 FUT087-B
S1-B / S1-W S1-G
WL-Box1
4). Auto transming (2.4G RF remote signal) The light can transmit remote signal to another light automacally while the distance between lights are 30m, the remote control distance is unlimited. (Aenon: all lights must be linked with same remote)
Auto transming
Light
Light
Distance 30m
5). “Do Not Disturb” mode is acvated and shut down (default acvated)
Turn on “Do Not Disturb” mode (wide using in the area which have power failure
frequently to save energy)
2.4G RF Remote turn on and turn off instrucon Turn on “Do Not Disturb” mode:
Press “OFF” buon three mes within three seconds and press “ON” buon three mes,
Acvated successfully once led light flashes four mes quickly.
Aenon: Do not disturb mode is acvated 1. When the light is OFF status (For
example: Use app or remote to turn off light)
The light is OFF status once you turn off power and turn on again. (User must
turn off and turn on power twice mes to acvate light or use APP / remote to
acvate light) 2. When the light is ON status The light is ON status once you
turn off and turn on power one me.
Turn off “Do Not Disturb” mode: Press “ON” buon three mes within three seconds
and press “OFF” buon three mes, closed successfully once led light flashes
four mes slowly. Aenon: The light will be always “ON” status if you turn on
and turn off power once user closed “Do Not Disturb” mode. App turn on and off
“Do Not Disturb” mode instrucon (check details in page 5)
4
Smartphone APP control instrucon
Added Zigbee 3.0 gateway into “Tuya Smart” App (please review instrucon of
Zigbee 3.0 gateway) 1). Connect with power supply. 2). Pairing network (aenon:
factory default is pairing network).
Way one: Turn off and turn on light 3 mes or over 3 mes connuously, the light
is in breathing status. Way two: Long press ” SET ” key unl indicator light
flashing. 3). Open “Tuya Smart” APP to click Zigbee gateway, then click “Add
sub device”. 4). Click “Indicator is flashing quickly”. 5). Support APP
dimming or group control and etc once added successfully.
5 in 1 Controller
App turn on and off “Do Not Disturb” mode (default acvated)
Click the light which need to be set up or group control — click “More”— click
“Power-on behavior”–turn on or off
5 in 1 Controller
5
Philips Hue control instrucon
Added “Philips Hue” into APP
1). Connect with power supply 2). Pairing network (aenon: factory default is
pairing network)
Way one: Turn off and turn on light 3 mes or over 3 mes connuously, the light
is in breathing status. Way two: Long press ” SET ” key unl indicator light
flashing. 3). Open “Philips Hue” App to click “SETTINGS” and click “Lights”
4). Click “+” on the top of right corner 5). Click “Search” 6). Click “Start
configuraon”, Follow the app instrucon to complete configuraon
6
Alexa voice control instrucon
1). Alexa control (Audio support Zigbee 3.0 protocol)
You can connect directly if your Amazon ECHO already is built-in zigbee 3.0
protocol, following model with zigbee 3.0 protocol: Amazon ECHO Plus ( 2nd
Gen), ECHO (4th Gen), ECHO Studio, ECHO Show (2. Gen)
1). Connect with power supply 2). Pairing network (aenon: factory default is
pairing network)
Way one: Turn off and turn on light 3 mes or over 3 mes connuously, the light
is in breathing status. Way two: Long press ” SET ” key unl indicator light
flashing.
“Alexa, Discover devices”
3). Say to Amazon ECHO “Alexa, Discover devices” Wait for a while to discover device, Voice control is acvated
2). Alexa control (Audio don’t support Zigbee 3.0 protocol)
Please add device into Miboxer Zigbee 3.0 gateway if your Alexa don’t support
zigbee 3.0 protocol (check details in page 5), then start following steps
1). Open Alexa App 2). Click “More” on the boom of right corner 3). Click
“Skills & Games”
4). Click ” ” on the top of right corner 5). Type into “Smart life” and search
6). Click “Smart Life” skill, follow instrucon to finish configuraon and start
voice control
7
Google Home voice control instrucon
Please add device into MiBoxer Zigbee 3.0 gateway (check details in page 5)
and start following steps
1). Open Google Home App 2). Click “+” on the top of le corner
3). Click “Set up device”
4). Click “Works with Google”
5). Click ” ” on the top of right corner 6). Type into “Smart life” and search
7). Click “Smart Life” skill, follow instrucon to finish configuraon and start
voice control
8
Aenon
1. Please turn off power supply before installaon. 2. Please ensure input
voltage to be same as requirements from device. 3. Don’t disassemble device if
you are not expert, otherwise it will damage it. 4. Please do not use the
light in the place with widely range metal area or strong electromagnec
wave nearby, otherwise, the remote distance will be seriously affected.
Scan QR code to watch Zigbee series video instrucon Or enter into following
link directly hps://miboxer.com/light/video/zigbee.html
Made in China