tuya FH-MC400A WiFi Smart Multi Function Door Magnetic Sensor User Manual
- June 9, 2024
- Tuya
Table of Contents
tuya FH-MC400A WiFi Smart Multi Function Door Magnetic Sensor User Manual
- Please read this manual carefully before use it, and keep it for future reference
Specification
Input Voltage: DC3V LR03 Static Current: ≤35uA Alarm Current: ≤135mA Low- voltage notification: ≤2.4V WIFI: 802.11b/g/n
Magnetic Control Distance: ≤20MM illumination range to detect: 0-10000Lux Working Temperature: -10℃~+50℃ Working Humidity: Max 95%RH
How to use
- Download SmartLife App in Application store, or scan below QR code;
Android/iOS
-
Push the mounting bracket upward and take out the bracket, then insert the battery.
-
Put the battery into the battery bin and place it according to the graphics in the battery bin. After two batteries are loaded, the indicator lights are always on and then of
-
Register with mobile phone number and log in to APP.
Bluetooth Network Configuration -
Turn on mobile phone Bluetooth; Use the PIN to press RESET till the LED indicator flashes quickly, App will search devices nearby automatically. The device will display once found.
-
Click ‘ Go to add ’ to enter the WiFi password according to prompt. And click ‘Next’ to start connection.
WiFi Network Configuration WiFi Network Configuration
-
Register with mobile phone number and log in to App; Click “My Home” interface “+” or click “Add Devices” in the middle blank. Select ‘Sensor’ and choose ‘Sensor (Wi-Fi)’.
-
Use the card PIN in the accessory package to hold RESET for more than 5 seconds, the indicator flashes quickly and waiting for network configuration. Enter the WiFI password according to the prompt, and click to ‘Next’ to start adding device.
-
When the indicator flashes quickly ( EZ Mode as default ), holds RESET for another 5 secods with card PIN, the indicator flashes slowly, device enter manual network configuration ( AP mode ). App choose AP Mode, tick ‘Confirm the indicator is blinking slowly’ and click ‘Next’. Click ‘Go to Connect’, mobile phone will switch to WLAN, find ‘SmartLife-XXX’ and click to connect. Return to APP current interface to continue adding device.
-
Network connection successfully, click ‘DONE’ to enter the interface of Door sensor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>