denver LCO-351 3M WiFi Dreamcolor Lightstrip User Manual
- June 10, 2024
- Denver
Table of Contents
LCO-351 3M WiFi Dreamcolor Lightstrip
User Manual
facebook.com/denver.eu
LCO-351 3M WiFi Dreamcolor Lightstrip
Tuya Smart
|
---|---
https://apps.apple.com/us/app/tuya-smart/id1034649547|
https://play.google.com/store/search?q=tuya%20smart&c=apps
Lighting product instructions for use Universal Edition Tuya Smart App
Safety information
Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.
- This product is not a toy. Keep it out of reach of children.
- Keep product out of the reach of children and pets to avoid chewing and swallowing.
- Product operating and storage temperature is from -20 degree Celsius to 40 degree Celsius. Under and over this temperature might affect the function.
- Never open the product. Touching the inside electrics can cause electric shock. Repairs or service should only be performed by qualified personnel.
- Only charge with the original adapter supplied with this product!
- Only use with the attached accessories. Using non original accessories can make the product work abnormal.
- The direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily operable. So, make sure there is space around the power outlet for easy access. Do not expose to heat, water, moisture, direct sunlight!
Preparation for use
- Power on the lamp while ensuring that your smartphone is connected to the 2.4 GHz Wi-Fi network;
- Download and open the app.
- Search for”Denver Smart Home”in the App Store or scan the QR code below or on the package to download and install the app.
- Tap the”Register”button to register if you download it for the first time.If you already have an account,tap the”Login”button.
Device Network configuration
- Open the Denver Smart Home app and access the”Devices”page.Tap the”+”mark in the upper right corner of the page.
- Select”Lighting devices”on the device list page.
- Two configuration modes are available for connection:EZ mode and AP mode.
1) EZ Mode
Ensure the light flashes quickly(twice a second).This indicates that the
lightstrip is in configuration mode.
If it is not blinking,then push and hold the reset button until it turns off.
Then let go and it goes into configuration mode..Tap the”Confirm light blinks
rapidly”button on the”Add Device”page to start connection.
Manufacturer’s name or trade mark, commercial registration number and address|
Xing Yuan Electronics Co.,LTD
Road No.8,Second Industrial Zone Fulong Village ,Shi Pai Town,523850 Dongguan
City,Guangdong Province ,PRC 91441900678830497F
---|---
Model identifier| Denver LCO-351 XY24LH-240100VH-ET
Input voltage| 220-240VAC
Input AC frequency| 50/60Hz
Output voltage| 24VDC
Output current| 1 A
Output power| Maximun 24W
Average active efficiency| 84.9%
Efficiency at low load (25%)| 85.6%
No-load power consumption| 0.087W
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment contains materials, components and
substances that can be hazardous to your health and the environment, if the
waste material (discarded electric and electronic equipment) is not handled
correctly.
Electric and electronic equipment is marked with the crossed out trash can
symbol, seen above. This symbol signifies that electric and electronic
equipment should not be disposed of with other household waste, but should be
disposed of separately.
All cities have established collection points, where electric and electronic
equipment can either be submitted free of charge at recycling stations and
other collection sites, or be collected from the households. Additional
information is available at the technical department of your city.
Hereby, Denver A/S declares that the radio equipment type LCO-351 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
denver.eu and then click the search ICON on top line of
website. Write model number: LCO-351. Now enter product page, and red
directive is found under downloads/other downloads.
Wi-FI lamp control gears:
Operating Frequency Range: 2412-2472MHz
Maximum radio frequency power: 18.41 dBm
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>