timberk T-VCC-230 Vacuum Cleaner Multicyclone Instruction Manual

June 9, 2024
TIMBERK

timberk T-VCC-230 Vacuum Cleaner Multicyclone

timberk T-VCC-230 Vacuum Cleaner Multicyclone

Dear customer!

We thank you for your wise choice and for a purchase of a vacuum cleaner. It will serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT!

Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE

There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

SAFEGUARDS

When using an electric vacuum cleaner, a number of safety precautions must be observed. Improper operation by ignoring safety precautions can result in damage to the health of the user and other people, as well as damage to their property.

  1. Read this instruction manual carefully to prevent any unit damage or injure when using. Mishandling can cause a damage to the product, a material damage of health harm to user.
  2. When using this appliance, basic precautions should always be followed:
  3. Before the first use of the appliance check that the voltage indicated on the rating label corresponds to the mains voltage in your home.
  4. For home use only. Do not use for industrial purposes.
  5. Do not use the appliance outdoors and on wet surfaces.
  6. To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.
  7. Do not handle the plug with wet hands. Never switch off the appliance by pulling the cord.
  8. Do not let the cord hang over sharp edges or touch hot surfaces.
  9. Always unplug the appliance from the power supply when not in use and before servicing.
  10. In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
  11. To avoid deforming of plastic components of the appliance or fire accident, never leave the appliance exposed to direct sun light or near any heater.
  12. The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
  13. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance shall not be made by children without supervision.
  14. Children must be under control in order not to be allowed to play with the appliance.
  15. To prevent damage to the hose, do not kink or stretch it.
  16. Do not put any object into air outlets. Do not use with outlet blocked. Keep free of dust, hair and anything that may reduce airflow.
  17. Be careful when cleaning on stairs.
  18. Before start using the vacuum cleaner, please remove all large or sharp objects from the floor in order to prevent damage of the unit.
  19. CAUTION: To avoid voltage overload do not plug the unit and other powerful electrical appliances to the power supply at the same time.
  20. Never use the vacuum cleaner without filters.
  21. Do not use the appliance on wet surfaces. This unit does not absorb water.
  22. If you have cleaned the carpet with liquid detergent, let the carpet dry up completely before vacuuming it.
  23. Never use the appliance without dust bin. Replace the dust bin without delay if it is damaged.
  24. Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
  25. If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
  26. The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
  27. Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of production.

APPOINTMENT OF THE DEVICE

Specifications of the device are shown in Table 1.

Table 1

Parameter Units Technical parameters
Power supply V/Hz 220-240~/50
Rated power consumption W 2200
Dust bin volume l 3
Cord length m 7
Noise level dB(А) ≤ 80
Suction power W 300
Net weight kg 6
Gross weight kg 7
Device dimensions mm 400285360
Packing dimensions mm 435290380

DEVICE DESCRIPTION.

**Fig. 1***

  1. «Floor/carpet» nozzle
  2. Retractable tube
  3. Hose air flow control switch
  4. Hose
  5. Hose base
  6. Handle for moving
  7. ON/OFF button
  8. Dust collector lock button
  9. Power cord winding button
  10. Power adjustment button
  11. Grille release button
  12. «Furniture/Slot» nozzle
  13. Upholstery nozzle
  14. Nozzle holder
    Device Description

*The appearance of the device may differ from the images in the manual

DELIVERY SET

  1. Vacuum cleaner and accessories – 1 pc.
  2. Instruction manual – 1 pc.
  3. Warranty card – 1 pc.
  4. Packing – 1 pc.

PREPARATION

  • Unpack the device and remove the sticker from the body.

  • In order to connect the hose to the vacuum cleaner insert hose base into sucking inlet and press gently until it clicks. In order to disconnect the hose press two locks located at hose base sides.
    Preparation

  • Pull out the retractable tube until the necessary length is reached. For this purpose move the retractable tube length adjuster and pull out the tube end.

  • Insert the hose into the tube.
    Preparation

  • Attach one of the nozzles to the tube:

  • The “Floor/carpet” combined nozzle is designed for carpet mats and similar floor -coatings, and for flat surfaces;
    Preparation

  • The “Furniture/Slot” nozzle is designed for cleaning upholstered furniture, curtains and decorative surfaces, cl corners or narrow slots.

  • Upholstery nozzle – that type of nozzle is used to clean different types of upholstery such as coach’s upholstery and car seats.

INSTRUCTION FOR USE

  • “Cyclone” system ensures maximum power during cleaning.

  • Before starting, unwind the cord to sufficient length and insert the plug into the power supply. The yellow mark on the cord shows optimal cord length. Do not unwind the  cord beyond the red mark.
    Instruction For Use

  • Press On/Off button to switch the unit on and press again to stop it.

  • You can adjust the air flow using the air flow regulator on the flexible hose handle:

  • Decrease flow for cleaning curtains, books, furniture, etc. Increase flow for cleaning bare floor.

  • To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing damage.

WARNING!

  • Be sure to clean the container after each cleaning.
  • Never use the vacuum cleaner without installed filter and with damaged or dirty filter. Otherwise, dust will fall into the motor and cause damage to the vacuum cleaner.
  • Don’t use the vacuum cleaner if the container is filled to the mark “MAX”. When the container is filled, dirty air clogs up the vacuum cleaner filter and the engine can overheat and disable.
  • Don’t use the vacuum cleaner for cleaning of material debris such as cement, whitewash, plaster, metal shavings and etc. These particles cause to the engine damage.
  • Don’t wash vacuum cleaner parts in a dishwasher or a construction machine.

CARE AND CLEANING

  • Switch off the appliance and pull the plug from the power supply.

  • For removing dust tank press dust tank release button.
    Care And Cleaning

  • We recommend making the filtration system clean up after every using. Cleaning up by following steps:

  • To open the dust tank bottom and clean dust and garbage need to press the button for opening the bottom of the dust tank.
    Care And Cleaning

  • Remove the dust tank from the dust tank lid. For this turn it counterclockwise. Clean the dust tank.

  • Clean the appliance outside surface with soft cloth using mild non-abrasive detergent.

  • Vacuum cleaner or cord should never be immersed into water or any liquids.

FILTER CLEANING

  • Please clean the filters at least once a year. If you use the appliance frequently, wash the filters after 3-5 dust bag cleanings.
  • Switch off the appliance and pull the plug from the power supply.
  • Open the cover.
  • Take out the HEPA filter
  • Wash the filter with warm water and dry on the air.
  • Place the filter back.
  • Remove «cyclone» system from the cover of the dust tank. For this turn it clockwise, holding the cover.
  • Wash cyclone system by water, dry and install back clockwise on the dust barrel.
  • Take out out-let cover and sponge situated on bottom.
  • Wash the sponge by water and dry.
    Filter Cleaning

Air outlet HEPA filter cleaning

7. Turn the device off and unplug it
8. Take out dust container from the device
9. Open the grille of the air outlet HEPA filter

Air outlet HEPA filter cleaning 

10. Rinse the HEPA filter with water and let it dry

Air outlet HEPA filter cleaning 

11. Put HEPA filter back
12. Put the grille back

STORAGE

  • Place the appliance vertically.
  • Insert the tube into special holder on the body.

UTILIZATION RULES

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point. For additional information about actual system of the garbage collection address to the local authority. Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.

After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device. The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form. The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or anthropogenic accidents.

http://www.timberk.ru/

timberk  Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals