China Electronics Shenzhen F400 Rugged Fabric Waterproof Bluetooth Speaker Instruction Manual
- June 6, 2024
- China Electronics Shenzhen
Table of Contents
Rugged Fabric Waterproof
Bluetooth® Speaker
Instruction Manual 7198-44
- Power ON/OFF 5.
- Mode (Play/Pause/Call Button)
- Vol+ / Next Track
- Vol- / Prey Track
- Reset Button
- Charging Port
- AUX Line-In
- LED Indicator
- Microphone
What’s included:
- 1 x Bluetooth° Speaker
- 1 x USB to Micro-USB Charging Cable
- 1 x 3.5mm Audio Cable
- 1 x Instruction Manual
Tech Specifications:
- Playing Time: 4 hours (at max volume)
- Battery Capacity: 2000mAh/3.7V
- Charging lime: 2.5 – 3 hours
- Pairing Name: “Rugged BT”
LED Indicator:
- Charging: Red ON
- Fully Charged: LED OFF
- Pairing Mode: Blue LED Flash
- Connected: Blue LED ON
- Playing: Blue LED Slow Flash
Instructions
Charging the speaker:
a. Using a Regulated USB Adapter:
- Connect the provided USB cable to a regulated USB adapter. Connect the opposite, Micro-USB end of the cable to the charging port on the speaker. Plug the USB adapter into the outlet to begin
b. charging.
- Using a Computer: Connect a USB cable to a USB outlet on your computer. Using the Micro-USB connector, connect the other end of the USB cable to a charging port on the speaker. Make sure the computer is on to begin charging the speaker. Red LED ON when charging & OFF when fully charged.
a. Power ON/OFF & Bluetooth Connection: Press and hold the Power button until
the Blue LED begins flashing. Once on, the
b. the speaker will enter Bluetooth pairing mode. Using a Bluetooth-enabled
device, search for “Rugged BT” from the list of available devices. Blue LED
will illuminate fully
c. indicating a successful pairing. Press and hold the Mode button to unpair.
3.a. Using the speaker: When receiving a phone call, press the Mode
b. button to answer and again to hang up. Double press to redial the previous
c. number.
d. Single press Mode to Play/Pause audio.
e. Long press to disconnect paired device.
f. Short press Vol+ to increase volume.
g. Long press Vol+ to skip to the next track.
h. Short press Vol- to decrease volume.
SAFETY PRECAUTIONS:
WARNING—When using this product, basic precautions should always be followed, including the following:
- Read all the instructions before using the product.
- Charge the speaker completely before initial use to ensure battery life.
- If the device does not respond once it is powered on, the battery capacity may be low.
- Do not overcharge the internal battery.
- Do not immerse into liquids or be exposed to moisture or weather conditions.
- Do not drop, knock, or shake. Rough handling can damage the internal precision component and its boards.
- Keep away from children, this device is not a toy.
- Keep away from fire or other sources of heat. Exposure to high temperatures may cause explosions or injuries.
- Do not short-circuit to avoid damage to the unit.
- Unauthorized changes or modifications may void your right to use this product.
- While using, always comply with any special regulations that may apply to the area you are in and always turn off your mobile device when its use is prohibited.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. The
device has been evaluated to meet general
RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>