timberk T-KH60BL104BI Kitchen Hood Instruction Manual

timberk T-KH60BL104BI Kitchen Hood

Product Information

Specifications

• Model: T-KH60BL104BI, T-KH60SS214BI
• Power: 220-240V~/50Hz, 1.4A
• Max Airflow: 750 m³/h
• Noise Level: 65-75 dB
• Dimensions (WxDxH): 297x600x139 mm
• Weight: 5.7 kg

FAQ

• Q: How often should I clean the filters?
  • A: It is recommended to clean the filters every 2-4 weeks for optimal performance.
• Q: Can I replace the LED lights myself?
  • A: Yes, you can replace the LED lights following the instructions provided in the user manual.

Dear customer!

We thank you for your wise choice and for a purchase of this timberk kitchen hood. It will serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT!

Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE

There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

SAFEGUARDS

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY!

• Please read these instructions carefully before the first use of this product and save this manual for your future reference.
• Before using the appliance for the first time, remove all packaging and protective polythene film.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precaution should always be followed, including the following:

Warning: Consult local regulations regarding fumes outlets. Do not connect the hood to a fume, ventilation. Confirm that room ventilation is appropriate with the local authorities. Make sure the maximum air extraction flow rate for the appliances in the room does not exceed 4 Pa (0.04 mbar). The room must have adequate ventilation if an extractor hood is used simultaneously with appliances that run on gas or other fuels. Air should not be discharged into the chimney, which is used to remove vapors from appliances running on gas or other fuel. It is necessary to observe the rules concerning air extraction.

1. These instructions are for your safety. Please read through them thoroughly prior to installation.
2. This appliance has been designed for use as an exhausting (air evacuation to the outside) or filtering (indoor air re-cycling) hood.
3. All installation work must be carried out by a competent person or qualified electrician.
4. This appliance must be installed correctly by a suitably qualified person, strictly following the manufacturer’s instructions.
   • WARNING: Accessible parts may become hot during use.
5. Little children should be kept away. Care should be taken to avoid touching the appliance.
6. The manufacturer highly recommends that this appliance be kept out of the reach of babies and little children.
7. The device is not intended for use by persons (including children) with reduced physical, sensory or mental abilities, or if they have no life experience or knowledge, unless they are supervised or instructed to use the device by a person responsible for their safety.
8. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
9. Children shall not play with the appliance.
10. Cleaning and user maintenance shall not be made by children without supervision.
11. Keep the appliance and its cord out of reach of children less than 8 years.
12. Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
13. Make sure that the power cord is not caught under or in the appliance and avoid damage to the power cable.
14. Do not install the appliance outdoors in a damp place or in an area which may be prone to water leaks. In the event of a water leak allow the machine to dry naturally. To avoid electric shock, do not immerse the appliance body, power cord and plug in water or any other liquid.
15. Do not use flammable sprays in close vicinity to the appliance.
16. Please dispose of the packing material carefully.
17. We also recommend that great care be taken during use and cleaning. Read the cleaning and maintenance sections for this appliance carefully.
18. A steam cleaner should not be used to clean the device.
19. The appliance is not intended to be operated by means of external timer or separated remote- control system.
20. Use only for domestic purposes in accordance with this instruction manual. The device is not intended for industrial use.
21. If the device was at a temperature below 0ºC for some time, it must be kept at room temperature for at least 2 hours before turning it on.
22. Do not attempt to repair the device or change its parts by yourself. To repair the product, contact an authorized service center.
23. Always unplug the device before assembling, disassembling and cleaning, or if you are not using it.
24. Do not use accessories that are not supplied.
25. When disconnecting the appliance from the mains, do not pull on the power cord, grasp the plug. Do not twist and do not wind it on anything.
26. Do not allow the appearance of a flare flame under the kitchen hood;

Attention:

Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.

Warning: The hood may stop working during an electrostatic discharge (e.g. lightning). This involves no risk of damage. Switch off the electricity supply to the hood and reconnect after one minute.

• To avoid the risk of fire, clean the metal filter regularly and closely watch and regulate pans containing hot oil.
• Do not use the hood if it shows signs of damage or imperfection. Contact customer services.
• Flambe cooking must not be carried out underneath this appliance.
• When installing the appliance, make sure that the following distances between the top of cooker or hob and the lowest part of the cooker hood must be observed:

> Gas hobs: 750 mm.
> Electric hobs: 650 mm.

Warning

• There is a risk of electric shock and fire if cleaning is not carried out in accordance with the instructions.
• For safety reason, please use only the same size of fixing or mounting screw which are recommended in this instruction manual.

Electrical Shock Hazard

• Only plug this unit into a properly earthed outlet. If in doubt seek advice from a suitably qualified engineer.
• Failure to follow these instructions can result in death, fire, or electrical shock.

APPOINTMENT OF THE DEVICE

• The kitchen hood is designed to ventilate the air and remove smoke, combustion products, fumes, odors and other undesirable impurities formed during the heat treatment of products.

TECHNICAL PARAMETERS

Technical parameters

Technical parameters are shown in table 1

Table 1

Article| Unit of measurement| T- KH60BL104BI| T- KH60SS214BI
---|---|---|---
Rated power| W| 72| 72
Motor power| W| 70| 70
Operating modes| –| Extraction, Recirculation| Extraction, Recirculation
Airflow capacity| m3/h| 600| 600
Number of speed levels| pcs| 2| 2
Number of motors| pcs| 1| 1
Grease filter| pcs| 2| 2
Carbon filter*| pcs| Sold separately| Sold separately
Control type| –| Mechanic rocker button| Mechanic rocker button
Lighting type| –| LED| LED
Number of lighting lamps| pcs| 1| 1
Maximum power consumption of lighting lamps| ****

W

| ****

2

| ****

2

Adjusting the brightness of the lighting| ****

–

| ****

No

| ****

No

Display| –| No| No
Child lock function| –| No| No
Timer| –| No| No
Color| –| Black| Silver
Housing material| –| Stainless steel| Stainless steel
Panel/edging material| –| Stainless steel| Stainless steel
---|---|---|---
Anti-return valve| –| Yes| Yes
Maximum noise level| dB| 62| 62
Duct diameter| mm| 120| 120
Dimensions| mm| 297x600x139| 297x600x139
Embedding dimensions| cm| 60| 60
Net weight| kg| 5| 5
Gross weight| kg| 5.7| 5.7
Power Options| V/Hz| 220-240~/50| 220-240~/50
Electricity protection class| –| II| II
Cord length (external)| m| 1.4| 1.4

• Type of carbon filter – CP 913A (168 mm*18.5 mm)

DESCRIPTION OF THE DEVICE

Fig. 1*

1. Body of the device
2. Slider
3. Mechanical switch
4. Lamp
5. Grease filters

*The appearance of the device may differ from the images in the manual

Dimensions of the device

DELIVERY SET

• Kitchen hood – 1 pc.
• Grease filter – 2 pcs.
• Screw 4×20 mm – 4 pcs.
• Screw 4×30 mm – 4 pcs.
• Wall plug – 4 pcs.
• Damper – 1 pc.
• Instruction manual – 1 pc.
• Warranty card – 1 pc.
• Packaging – 1 pc.

INSTALLATION

PREPARE FOR INSTALLATION

• Ventilation Mode. (see Fig. 3)
  1. Extraction Mode: You can install the 120 (±1.5) mm diameter aluminum exhaust pipe for extracting (sold separately).
  2. Recirculation Mode: Recirculating with carbon filter (sold separately), the smells and odors can be filtered and vented through the top vented hole and the exhaust pipe is not required.
• When possible, use at least 60 cm straight runs before any turns. Larger duct work may be required for best performance with longer duct runs. (see Fig. 4)
• Before installation, don’t connect the power.

Install the Hood (Extraction):

1. Remove all protective poly film from the hood and/or parts.
2. Recommend installation height: 65~75 cm above the cooktop for best extraction. (see Fig. 5)
   • Required height over gas hob: 750 mm;
   • Required height over electric hob: 650 mm.
   • NOTE: Before install the cooker hood, please install the damper onto the cooker hood. Press the damper down to install it. (see Fig. 6)
3. This product can be installed in two different ways. If the cooker hood is installed on the wall, please follow Way 1.

Way 1

1. First use a pencil to mark the installation position on the wall, then use a Measuring Tape to measure the height from the stove surface to the hood (the center point of aluminum grease filter) and use a Spirit Level Ruler to maintain the level, then use a pencil to draw a horizontal line along the level. (see Fig. 7)
2. According to the distance (450 mm) between the two installation holes on the back of the hood, and the distance from the installation holes to the bottom line of the hood, treat the horizontal line as bottom line, and use a pencil to mark the perforated positions on the wall in the corresponding positions. (see Fig. 8)
3. Drill the holes that have been marked on the wall with an Electric Drill (8 mm drill), and hammer the Wall Plug into the wall. Insert the two wall plugs with 4*30 mm screws, do not lock too tight them first, and leave a gap of no less than 5~10 mm; (see Fig. 9)
   • WARNING: Failure to install bolts or fasteners in accordance with these instructions may result in electric shock
4. Press the lock on the left of the grease filter and pull it downward. Pull out the slide and detach the other grease filter. Then put the cooker hood onto the two screws and lock the screws tight. (see Fig. 10)
5. Pull out the slide and install the grease filter back on the slide, then push it into the cooker hood and install the other grease filter. (see Fig. 11)
6. Install the Aluminum Exhaust Pipe into the air outlet and lock it with a Cable Tie (not included in the delivery set); the other end of the Aluminum Exhaust Pipe will be pulled upward to outdoor (Note: This step can be ignored if use as recirculation mode with carbon filter). (see Fig. 12)
7. Connect the power and pull out the slide. Then turn the LED lights on/off to test whether the functions are working properly. (see Fig. 13)
8. If the cooker hood is installed at the bottom of the cabinet, please follow Way 2 below.

Way 2:

1. Use the drilling tool to open an air pipe hole and a power cord hole at the bottom of the cabinet
2. Press the lock on the left of the grease filter and pull it downward. Pull out the slide and detach the other grease filter. Then put the cooker hood under the cabinet.
3. Align the air ventilation port of the cook hood with the cabinet ventilation hole at the top, pass the power cord through the power hole, and then use four 4*20 mm screws to lock into the corresponding position of the cabinet to fix the cook hood.
4. Install the Exhaust Pipe into the air outlet and lock it with a Cable Tie (not included in the delivery set), the other end of the Exhaust Pipe through the hole on the cabinet will be pulled upward to outdoor.(Note: This step can be ignored if use as recirculation mode with carbon filter). (see Fig. 15)
5. Connect the power and pull out the slide. Then turn the LED lights on/off to test whether the functions are working properly. (see Fig. 16)

Carbon Filter Installation (Recirculation):

To set the air recirculation mode, it is necessary to purchase a carbon filter (CP 913A) with a diameter of 168 mm and a height of 18.5 mm

1. Carbon filter can be used to trap odors. In order to install the carbon filter, the grease filter should be detached first. Pull out the slide and remove the grease filter. (see Fig. 17)
2. Plug the activated carbon filter into the unit and turn it in clockwise direction. Repeat the same on the other side. (see Fig. 18)

NOTE:

• Make sure the carbon filter is securely locked.
• When the carbon filter is installed, the suction of the cooker hood will be reduced.
• The carbon filter should be changed every 2-4 months depending on the conditions of use.
• To replace the carbon filter, it is necessary to purchase the same filter (CP 913A) with a diameter of 168 mm and a height of 18.5 mm

OPERATION

• Always turn your hood on before you begin cooking to establish an airflow in the kitchen.
• Let the blower run for a few minutes to clear the air after you turn off the hood. This will help to keep the entire kitchen clean and fresh.

Mechanical Rocker button

Operate the hood as follows:

• Light button On the left side of hood.
• Speed button – On the right side of hood.

“II”: high speed level.
“I”: Low speed level.
“o”: Off

CLEANING AND MAINTENANCE

Proper maintenance of the Cooker Hood will assure proper performance of the unit. Before cleaning unit, unplug or disconnect the cooker hood from the power supply.

GREASE FILTERS

• The grease filters should be cleaned frequently.
• Can be cleaned in dishwasher under high temperature without using any detergent.

CARBON FILTER

The carbon filter should be changed every 2-4 months depending on the conditions of use. Replace more often if your cooking style generates lots of greases, such as stir frying. These filters are not washable and cannot be reused. Refer to installation instructions included with a carbon filter.

STAINLESS STEEL CLEANING

Do:

• Regularly clean it with a cloth or rag soaked with warm water and mild soap or liquid dish detergent.
• You may also use a specialized household stainless steel cleaner.

Don’t:

• Use any steel or stainless-steel wool or any other scrapers to remove stubborn dirt.
• Use any harsh or abrasive cleansers.
• Let plaster dust or any other construction residues reach the hood. During construction/ renovation, cover the cooker hood to make sure no dust sticks to the stainless-steel surface.

Avoid when choosing a detergent:

• Any cleaners that contain bleach will attack stainless steel.
• Any products containing: chloride, fluoride, iodide, bromide will deteriorate surfaces rapidly.
• Any combustible products used for cleaning such as acetone, alcohol, ether, benzol, etc., are highly explosive and should never be used close to a range.

PAINTED FINISH CLEANING:

• Clean with warm water and mild detergent only.
• If discoloration occurs, use a finish polish such as automotive polish. (DO NOT use a rough abrasive cleaner or porcelain cleaner.)

LED Light Replacement (see Fig. 20)

CAUTION：

Before cleaning or repairing and replacing accessories, please make sure to shut down the power before operation, so as to avoid electric shock, damage to human body and even endanger life safety!

NOTE:

Replace the lamp with another which has the same characteristics as a higher voltage lamp could damage the electrical unit. (see Fig. 20)

1. Switch the unit off and unplug the appliance.
2. Slide out the front panel and remove the two aluminium filters.
3. Push out the lamp by hand from its back, pull out the lamp connecting lines together;
4. Open the protection cover as shown in the picture below, and unplug the connected plastic to replace a new lamp.

TROUBLESHOOTING

Turn off and unplug the device. Contact an authorized

service center

Motor is damaged

Cooker hood and light not function

| ****

Light is expired

| Turn off and unplug the device. Contact an authorized service center
The power supply is not connected| Check if the plug is well connected and the power is on

Power cord is damaged

| Turn off and unplug the device. Contact an authorized

service center

Motor functions but light not works| ****

Light bulb is damaged

| Turn off and unplug the device. Contact an authorized

service center

Vibration on the cooker hood

| ****

Fan is damaged

| Turn off and unplug the device. Contact an authorized service center

Motor is not correctly installed

| Turn off and unplug the device. Contact an authorized

service center

The device is not correctly hanged on the brackets| Hang the device correctly, according to this manual
The screw is loosen| Tighten the screws

Weak Suction

| The distance is too far between the cooker hood and cooking appliance| Lower down the cooker hood installation height but within the safety guideline
Strong convection due to too much ventilation| Shut off some of the windows or doors
The cooker hood is noisy| Exhaust pipe surface is distorted| Turn off and unplug the device. Contact an authorized service center

UTILIZATION RULES

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
For additional information about actual system of the garbage collection, address to the local authority.

Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage. After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device.

The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form.

The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or anthropogenic accidents.

www.timberk.ru

References

• Timberk - Официальный сайт бренда бытовой техники

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>