Southern Telecom PBT7538 Bluetooth Speaker User Manual

Southern Telecom PBT7538 Bluetooth Speaker User Manual

READ CAREFULLY AND KEEP THIS MANUAL

Customer Support
For eny questions or problems with your product, please visit our website at SouthamTalecom.com and click on Product Support.

Caution

To ensure safe and proper use. read all safety information before usin~ the device. Only usewithmilnufacturer-appr- ovedbiltteries,diargers,accessories,andsuppi es

• THIS DEVICE IS NOT A TOY, keep away from diildren and pets
• Do riot disassemble. modify, or repair the device.
• Do not expose to extreme temperatures (heat or cold). open f l.,mes. humid, or wet concftions
• Do not submerge in water
• Low power m;,,y C”‘-‘Se poor BluelDOth connection or sound distortion
• Do ootoverdiargebattery.
• If usin~ with a USB adapter. make sure the adapter is not dama~ed.
• Do notalklwthe USB port or the connectors of the supplied USB Cilbletobe exposed to dust or water. or to come into oontact with any conductive materials such as liquids. metallic powders, etc.
• The speaker contains a built-in battery and should not be disposed of with regular t>household waste. Please consult the localauthoritieson the correct way to dispose of this device.

In the Box

• PBT7538-Wirelass Speaker (xl)
• USB Charging Cable (x1)
• User Manual(xl)

Location of Controls

Getting Started

Charging the Speaker

Plug the small coonector of the included diarging cable into the charging port on the top of the speaker. Plug the large cDnnector into the USB port Dn a cDmputer, or into a 5V USB adapter (not included) and plug into a wall outlet.
The LED irldicator will tum RED while charging arid tum OFF when fully charged. When the speaker is low on power, a tone will be heard indicating that it needs to be recharged.

Powering ON/OFF

• Turn the (POWER/VDU dial clockwise until it clicks tD power the speaker ON.
• When powered ON, the speaker will enter Bluetooth pairing mOOe, and will automatically re-pair to any available previously-paired device nearby.
• Turn the [POWER/VOU dial counter-clockwise until it clicks to power the speaker OFF

Adjusting Volume

In all modes, overall volume can be adjusted by t1sning the [POWERNOU dial on the top of the speaker. In AUX and Bluetooth mOOas, volL.rna can also be controlled by your connected device

• Turn the [POWER/VOU dial clockwise to incraa■a volume.
• Turn the [POWER/VOU die I counter-clockwise to decrease volume

Adjusting Playback

In Bluetooth, FM Radio, TF and USB modes, playback can be coot rolled by the buttons on the top of the speaker.

• Press the to pause playback. Press again to resume.
• Press the button to skip to the next track/station
• Press the   button to skip to the previous track/station.

Changing Input Modes

Press the I M I button on the top of the speaker to switch input modes.

Changing Input Modes

Press the I M I button on the top of the speaker to switch input modes.
ATF card or USB device must be inserted or connected to switch to these modes

Using the LED Lights

• Press arid hold the [ M I button on the top of the speaker to turn the LED lights ON arid OFF

Bluetooth Pairing

1. Povver the speaker ON. A tone will be heard arid the speaker will enter Bluetooth pairing mode
2.  Set your mobile device to search for Bluetooth devices. When the list appears, select PBT7538 from the found devices
3. After a successf ul pairing, a tone will be heard arid you will be able to play music on the speaker.

Using the AUX Input

Insert one arid of a 3.5 mm auxiliary cable (not includad} into the AUX input port on the top of the speaker. Insert the other erld into the headphone jack or 3.5 mm
aux output port on your media-playing device.

Switch input modes until you reach AUX mode
In AUX mode, all playback will be controlled by your connected device.

Using a TF Card or USB Device

To insert a TF card, insert a TF card into the TF card slot on the speaker with the metalcontactsfacingdown,andpushinuntilitclicks
To insert a USB device, such as a USS flash drive containing audio files, in sert the
USB device into the USB device port on the top of the speaker
Change input modes until you enter TF or USB mOOe. The speaker will automatically begin pl eying music off the device. Note: You must have a TF card or
USB device inserted to switch to TF or USB input mode.

In TF card arid USB mode, all playback is coot rolled by the buttons on the speaker.

• Press the button to pause and resume playback.
• Press the and buttons to skip tracks.

Instantly recognizable. Instantly meg% wing. The Polaroid Classic Border and Polaroid Color Spectrum logos let you know you’ve purchased a product that exemplifies the best qualities of our brand and that contribute to our rich heritage of quality and innovation.

Polaroid, Polaroid Color Spectrum and Polaroid Classic Border Logo are trademarks of PLR IP Holdings, LLC, used under license. PLR IP Holdings LLC, does not manufacture this product or provide any manufacturer’s warranty or support.

Warranty Information

90-Day Limited Warranty Territory: United States/Canada
LIMITED WARRANTYTO ORIGINAL CONSUMER This product as supplied and distributed new by an authorized retailer is warranted by Southern Telecom, Inc. to the original consumer purchaser against defects in materials and workmanship (“Warranty”) as follows:
To obtain warranty service:  Visit our customer support portal: www.customersupport123.com

• Select the brand and model of your device
• Select “Service Request” and fill out the form to begin your inquiry
• Exchanges require dated proof of purchase from an authorized retailer

Warranty service not provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification including software modifications such as the installation of custom firmware. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT OR REFUND OF THE ORIGINAL PURCHASE PRICE – AT DISTRIBUTOR’S SOLE DISCRETION – ARETHE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL, DIRECT INDIRECT, SPECIAL PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASEDTHE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies.

FCC Information

This device complies with Part 15 of the FCC Rules. Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment. Note: This equipment has been tasted and found to comply with the limits for a Class B digital device, pur-suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
WARNING LI-Ion Battery Inside This product is fitted with a Li-ion battery. Do not damage, open, or dismantle the battery and do not use it in damp and/or corrosive conditions. Use only with compatible chargers. Never dispose of batteries in a fire, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C (140°F).

Rating Label Definitions

Direct current symbol.
This symbol signifies the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment.
This symbol signifies and declares that this equipment has battery charging which complies with California CEC and energy efficiency.
This symbol signifies that this is a wireless device powered by Bluetooth® technology.
This symbol represents FCC Declaration of Conformity and compliance.

Using the FM Radio

Change input modes until you enter FM radio mode

In FM radio mode. all playback will be controlled by the buttons on the speaker.

• Press the I ►II] button to start or stop automatically scannin i;i & saving available radio stations. If it is not stopped, the radio will make a complete scan of and save all nearby radio stations with good reception.
• Press the IH-11] and[.,..] buttons to skip through saved stations

Using a Microphone
A microphone may be used in any mode.

Plug the 1/4″ connector of a wired microphone (not included) into the microphone input port on the top of the speaker. Switch the mic ON

• Press and hold the [.+I] button to increasa rnic volume
• Press end hold the [14<1] button to deerease micvolume,
• Adjust CNerall volume with the [POWER/VOL) dial on the speaker.

Note; In order to avoid loud feedback, keep the microphone behirld the speaker and pointed away from the speaker. and switch it off when not in use

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>