timberk T-HC340SLDW Hair Clipper Set Instruction Manual

timberk T-HC340SLDW Hair Clipper Set

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE
There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

PRECAUTIONS

When using the electric hair clipper set, please observe the following precautions. Improper operation while ignoring these precautions can result in an injury to the user and others, as well as damage to their property.

1. Please read this instruction manual carefully before use and keep in a safe place for future reference.
2. Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
3. For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
4.  Do not use outdoors.
5. Always unplug the appliance from the power supply before cleaning and when not in use.
6.  To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.
7. Do not take this product to a bathroom or use near water.
8.  The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
9. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance shall not be made by children without supervision.
10. Children must be under control in order not to be allowed to play with the appliance.Do not leave the appliance switched on when not in use.
11. Do not use other attachments than those supplied.
12. Do not operate after malfunction or cord damage.
13. If the power cord is damaged, it should be replaced with a special cord obtained from the manufacturer or a service center.
14. Never try to repair this appliance by yourself. In case of failure, contact the nearest seller.
15. Keep the cord away from sharp edges and hot surfaces.
16. Do not place or store the appliance where it can fall or be pulled into a tub or sink.
17. Do not pull, twist, or wrap the power cord around the appliance.
18. Never insert any objects into openings in the appliance housing.
19. Do not put operating appliance on any surface, it may cause injury or damage.
20. Do not use the appliance with damaged comb, or with teeth missing from the blades as injury may occur.
21. NOTE: KEEP THE BLADES OILED.
22. The instrument must be powered only by a safe, ultra-low voltage marked on the instrument.
23. Do not use the hair clipper when the skin is infected.
24. Do not use the hair clipper on animals.
25. If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.

This symbol indicates that a part of the appliance can be washed under tap water

DESIGNATION

The device is designed for hair cutting and beard modeling. The clipper is equipped with a cut length regulator and special attachments to achieve the desired result.

SPECIFICATIONS

Specifications of the device are shown in Table 1.

Table 1

DEVICE DESCRIPTION

1. Display
2. ON/OFF button
3. Blade length display
4. Detachable combs (3/6/9/12 mm)
5. Hair brush
6. USB cord
7. USB Type-C cord
8. Cleaning brush
9. Oiler
10. Charging station
    

Fig 1*

• The picture is for reference only and may differ from the actual product

DELIVERY SET

1. Hair clipper – 1 pc.
2. Charging station – 1 pc.
3. Detachable comb – 4 pcs.
4. Hair brush – 1 pc.
5. Cleaning brush – 1 pc.
6. Oiler – 1 pc.
7. USB cord – 1 pc.
8. USB Type-C cord – 1 pc.
9. Instruction manual – 1 pc.
10. Packaging – 1 pc.

BEGINNING

1. The blades of the machine should thoroughly lubricated before the first use.

2. The battery must be fully discharged and charged. The charging time is 3 hours. A full battery charge lasts for 4 hours of operation. Recharge the battery at least once every 6 months, even if the machine is not in use. You can use the machine while recharging.

3. The machine can be charged using any of charging cords supplied in the package.
   Connect the USB input of the cord to the USB port, and the other end to the connector for connecting the power cord on the device.

4. The machine can also be charged using the base. Connect the charging cord to the base. Install the machine on the base. The charging process will start automatically.

5. The red indicator on the display will blink indicating the charging process.

OPERATION

1. To turn on the machine, press the on/off button.
2. You can use a machine without a comb (the length of the haircut without a comb is 0.8 mm)
3. You can adjust the height of the blades of the device by rotating the circular knob on the bottom of the device. The minimum height is 0.8 mm, the maximum height is 2.0 mm. The selected value will be displayed on the circular controller
4. The package includes 4 combs for choosing the additional desired length of the haircut – 3 mm, 6 mm, 9 mm, 12 mm.
5. To adjust the length of the cut using the comb, take the removable nozzle, place the guide nozzles on top of the blades and slide the nozzle down until it clicks
6. Using the power button, you can select the required operating power (Minimum, Average, Turbo mode) – the numbers 1-2-3 will be displayed on the display.
7. During operation, the display will show the charging level as a percentage.
8. At the end of the operation, turn off the machine, to do this, press the on/off button again.

Replacement of the comb attachment

1. Turn off the machine
2. Turn the machine upside down
3. To remove the nozzle from the cutting block, gently press the top of it with your thumb – then slide the nozzle.
4. To attach the nozzle to the cutting unit, place the guide nozzles on top of the blades and slide the nozzle down until it clicks.

Reminders

1. It is better to cut dry hair.
2. Comb hair carefully before cutting using the supplied hair brush
3. Always take off a little at a time.
4. For even cutting do not force the clipper. Also remember to comb the hair more frequently to remove trimmed hair and check for uneven strands.
5. Cutting options are given in fig. 2.
   

CARE AND CLEANING

Care and cleaning

• Turn off the clipper and disconnect it from power supply.
• Remove the blades. For this purpose:
  1. hold the clipper with its logo upwards.
  2. press the blades up and they will be detached (make sure to perform it after the device is turned off and unplugged)
• Clean the blades and the clipper from hair with the help of a brush supplied (you can rinse the blades under water)
• Wipe the clipper with a dry soft cloth.
• Put the blades on the unit. Make sure the blades are installed correctly
• To ensure continuous and reliable operation of the clipper, oil the blades using special oil after each haircut.
• After oiling turn on the clipper to allow even distribution of oil between the blades and check their smooth operation. Remove excessive oil.
• Do not use hair oil, grease, oil mixed with kerosene or any solvent.
  

STORAGE

1. Keep the appliance in a cool, dry place.
2. The blades must be oiled for storage period.

REMOVING THE BATTERY

1. Battery should be removed from the appliance before its utilization
2. Unplug the appliance from mains socket and switch it off before removing the battery.

TROUBLESHOOTING

hair with the precision trimming head and move the appliance against the direction of hair growth. Make sure that the appliance is fully in contact with the skin
The appliance does not work as well as it should| Hair may be stuck in the shaving head| Clean the shaving head (see chapter ‘Care and Cleaning’).
The battery is empty| Recharge the device
The appliance pulls out the hair.| You move the appliance too fast| Do not move the appliance too fast
The appliance does not work| The battery is empty| Recharge the device
The device is not charging| Ambient temperature is not correct| Do not charge the device at temperatures below 0 oC or above 40 oC.
Usage time after fully charged is less than 60 minutes| Engine load increases if shaving head (shaving surfaces) has not been cleaned for long time| Clean shaving heads (shaving surfaces) and/or hair compartment

UTILIZATION RULES

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
For additional information about actual system of the garbage collection, address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.

The symbol on the unit, packing materials and/or documentations means the battery used in this product not be toss in the garbage with ordinary household garbage.

CUSTOMER SUPPORT

www.timberk.ru

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>