timberk T-HU6-A20M-W Ulrtasonic Humidifier Instruction Manual

timberk T-HU6-A20M-W Ulrtasonic Humidifier Instruction Manual

Dear customer!
We thank you for your wise choice and for a purchase of an ultrasonic humidifier. It will
serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important
information regarding your safety, as well as recommendations concerning the correct
use and maintenance of this appliance. Keep this manual together with a warranty
card, cash register receipt and, if possible, carton and packaging material. This
instruction manual describes different types of this device. The device you purchased
may differ slightly from the description in the manual, which does not affect the
methods of use and operation. The manufacturer reserves the right to make minor
changes to the device without additional notice which is not fundamentally affect its
safety, performance and functionality. There may be some misprints in text and digital
notations in the present manual.

IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all
possible situations that you may experience using the device. The manufacturer is not
responsible for damage of the appliance or its parts during transportation, as a result of
incorrect installation or voltage fluctuations, as well as when any part of the appliance
has been changed or modified.

NOTE
There is a label on the device which has all the necessary technical data and other
useful information about the device. Use the appliance only for the purpose specified in
this manual

SAFEGUARDS
Observe these safety rules when operating the device. Improper operation by ignoring
the safeguards may result in damage to the health of the user and other people, as
well as damage to their property. The manufacturer is not responsible for damage to
health and property damage resulting from improper installation and operation of the
device.

1. Read these instructions carefully before using the appliance to avoid damage
   during use.

2. Before starting up for the first time, check that the specifications on the product
   comply with the power supply specifications.

3. The appliance must be monitored during its operation, especially if there are
   children nearby. Children must be supervised to prevent playing with the
   appliance.

4. The device is not intended for use by persons (including children) with reduced
   physical, sensory or mental abilities or in the absence of their life experience or
   knowledge, unless they are supervised or instructed on the use of the device
   by the person responsible for their safety.

5. Use only for domestic purposes in accordance with this instruction manual.
   The device is not intended for industrial use.

6. The humidifier must not be operated if its power cord is damaged, or if the
   humidifier is defective, damaged in case of a fall or other circumstances. The
   humidifier should only be operated fully assembled.

7. Do not attempt to repair the device or change its parts by yourself. To repair
   the product, contact an authorized service center.

8. If the power cord or plug is damaged, to avoid danger, it must be replaced by
   the manufacturer, authorized service center, or similar qualified personnel.

9. To avoid burns, do not touch the humidifier membrane, while it is operating.
   Due to the high oscillation frequency, the membrane becomes very hot.

10. To avoid risk of electric shock, do not place the power cord near heating
    appliances or flammable or combustible substances.

11. Remove the electrical plug from the power outlet in the following cases: before
    draining or filling the tank with water; before assembly, disassembly and
    cleaning, or if you do not use it; before mounting/dismounting the humidifier
    elements; before moving the humidifier to another location. Install the
    humidifier on a flat, dry surface.

12. When disconnecting the appliance from the mains, do not pull on the power
    cord, grasp the plug. Do not twist and do not wind it on anything.

13. Humidifier’s steam can damage the surfaces it touches. Do not install the
    humidifier on the floor, or in the vicinity of heating appliances, walls, furniture,
    or other items.

14. The manufacturer and seller are not responsible for damage caused by
    improper positioning of the humidifier. The humidifier should be installed on
    any elevation, for example, on a table, stand, etc. at least 60 cm from the floor
    and at least 10 cm from the wall.

15. Do not put the humidifier in water or other liquids

16. Do not install the humidifier in the corridor or in other places where it may be
    hit, knocked over, etc. If the humidifier is not in use, disconnect it from the
    power supply.

17. Do not lay the power cord under carpets or other objects. Position the
    humidifier so that the cord can’t be accidentally touched. Make sure that the
    power cord does not touch sharp edges or hot surfaces.

18. Do not use outdoors or in high humidity areas. Excessive humidity in the room
    can cause water to condense on windows and furniture. If this happens, turn
    off the humidifier.

19. Do not allow foreign objects to enter the humidifier.

20. Do not sit, stand, or place heavy objects on the humidifier.

21. To prevent damage to the humidifier, do not add essential oils, preservatives,
    flavorings, or other impurities to the water in humidifier. The manufacturer and
    seller are not responsible for the damage to the humidifier in case of ignoring
    this warning.
    NOTE
    High-frequency vibrations of the membrane of the ultrasonic humidifier are not
    audible and are completely safe for people and pets.

APPOINTMENT OF THE DEVICE

A humidifier increases relative air humidity in a room and stabilizes its microclimate,
allowing to avoid harmful conditions of low humidity. Comfortable conditions are
achieved at relative air humidity of 40 to 60%. Insufficient air humidity results in
dehumidification of mucous membranes which is the cause of decrease in immunity,
head ache, cracking of lips, “sandpaper” in the eyes, also insufficient air humidity
enables development of infection and causes respiratory illnesses, fatigue, increased
eye fatigue and worsening of concentration, and has negative effect on pets and indoor
plants, causes increased dust generation and electrostatic charging of synthetic
fabrics.

SPECIFICATIONS

Specifications of the device are shown in Table 1.
Table 1

DEVICE DESCRIPTION

• The appearance of the device may differ from the images in the manual

1. . Spray nozzle
2. Water tank
3. Level float
4. Air outlet
5. Aroma box
6. SLEEP mode lamp
7. Base of the device
8. Mechanical control knob (only for T-HU6-A20M-W model)
9. Float
10. Digital control panel (only for T-HU6-A20E-W model)

DELIVERY SET

1. Ultrasonic humidifier – 1 pc.
2. Remote control (только для модели T-HU6-A20E-W) – 1 pc.
3. Instruction manual – 1 pc.
4. Warranty card – 1 pc.
5. Packaging – 1 pc.

FILLING THE WATER TANK

1. Remove the cover with nozzle from the tank.
2. Pour water into the tank not higher than the end of the guide tube (“MAX” mark).
3. Place the cover with nozzle on the tank.
4. Plug the power cord into an electrical outlet.

IMPORTANT!

For the operation of the device, it is better to use purified water from household water
filter. It is necessary for the life time of the humidifier. With purified water there will be
no white spots around the device.

White spots around the device are a salt of calcium and magnesium, which are part of ordinary tap water. When using unpurified water, they are discharged with steam and    deposited on surrounding objects and surfaces. Although these substances are safe for people, in large quantities they can have harmful effects on furniture.

• Do not fill the tank with other liquids but filtered tap water. Different composition of liquids has harmful effect on internal parts of the device and causes malfunctions.

• Do not fill the unit or the water tank with such additives as essential oils, fragrances, cleaning agents, chemical medical drugs, warm water (above 40°C), etc. Otherwise, the water tank and internal parts of the unit will be damaged and inoperable. Do not fill water directly into the internal parts of the unit or the atomizer.

• Water inside the unit may cause malfunctions of the unit.

• Do not hit or throw the water tank. It may get damaged resulting in water leaks.
  Do not use the unit in case if the water tank is heavily hit. Immediately contact the technical support service or the maintenance and repair station.

• Every day fill the tank with fresh filtered water and keep the unit clean.

OPERATION OF THE DEVICE

Switching on

Install the appliance vertically on a flat and dry surface, fill the tank with water then
connect the device to the power line. Turn on/off and steam outlet intensity knob all the
way to the right. The appliance will switch on, the blue operation indicator will light up
on the control panel and steam will start coming from the atomizer. At the very beginning of operation, the atomizing level may appear unstable, which is caused by the temperature difference and water quality. It will take a short period time for this process to stabilize.

Adjusting steam outlet intensity

You can adjust steam intensity by turning on/off and steam outlet intensity knob to the
left or right.
Comfortable conditions are reached at 40 to 60% relative air humidity. You can
yourself determine the comfortable humidity level or use a special device called a hygrometer (not included in the set), measuring the relative humidity level.

ATTENTION!

If a large amount of condensate is generated on the upper part of the appliance when it
is operating, then you need to decrease the steam outlet intensity by turning on/off and
steam outlet intensity knob counterclockwise.

Switching off

To switch the appliance off, turn on/off and steam outlet intensity knob all the way to
the left and disconnect the appliance from the electric mains.

Control panel

• On/Off / SLEEP mode

• Steam intensity adjustment
  

• Timer settings
  

• Constant humidity settings
  

Switching on

Install the appliance vertically on a flat and dry surface, fill the tank with water then connect the device to the power line. Press the button. At the very beginning of  operation, the atomizing level may appear unstable, which is caused by the temperature difference and water quality. It will take a short period time for this  process to stabilize.

SLEEP mode

Hold the button for a couple of seconds to activate SLEEP mode. To turn off the function hold the  ****button again.

Adjusting steam outlet intensity

The more steam comes out, the stronger and faster air humidification will be. Comfortable conditions are reached at 40 to 60% relative air humidity. You can yourself determine the comfortable humidity level or use hygrostat function by pressing the button.

ATTENTION!

If a large amount of condensate is generated on the upper part of the appliance when it is operating, then you need to decrease the steam outlet intensity.

TIMER function

Press the button to select shutdown time. Time can be selected in the range from
1 to 8 hours.

Constant humidity settings (hygrostat function)

During operation of the device press the button to select required relative
humidity level. Relative humidity level can be selected in the range from 40% to 90%.

One press of the button equals 5%, During the setting process, selected humidity
level will flash on the display. When the room humidity reaches the set level, the device
will turn off automatically.

Switching off

Press the button to turn off the device. Unplug the power cord.

Automatic switching off when there is no water

When water level in the tank drops below minimal level, the ultrasonic membrane will
automatically switch off and the red indicator will light up on the control panel. To
continue operation of the appliance it is necessary to fill the tank with water according
to «Filling the water tank» paragraph, and then connect the appliance to the electric   mains.

Adding essential oils

Pour three or five drops of essential oil in the aroma box. After adding, outlet steam will
contain the smell of essential oils.

ATTENTION!

Add the essential oil only in the aroma box Don’t pour the oil directly in the water Water-soluble essential oils must be used.

Remote control

• On/Off button

•  Steam intensity adjustment: low, medium, high

•  Timer settings
  

• SLEEP mode

NOTE: One CR2025 battery is used to power up the remote control (battery is not included).

CLEANING AND MAINTENANCE

• Before cleaning the appliance, make sure it is
  unplugged. Otherwise, it may result in electric shock.

• Before cleaning, in order not to burn your hands, wait until the water in the base of the appliance has completely cooled.

• Use a damp and soft cloth to wipe the outside of the appliance.

• To avoid electric shock, do not scratch or damage the components of the device when cleaning.

• Do not use solvent, gasoline, dimethylbenzene, hard brush, talcum powder and other substances when cleaning the device.

• Wipe off any remaining water inside the base of the unit under the tank with a damp and soft cloth.

• To remove water on small parts, you can use a brush and then wipe them again with a soft cloth.

• Clean the device once or twice a week.

• If dirt is formed on the membrane, clean it with a brush.

• Rinse the water tank cover and nozzle carefully and effortlessly with fresh water, otherwise this will cause water to leak through the cover.

• After removing any remaining water from the surface of nozzle, wipe it with a soft
  cloth.

• Clean the outside of the appliance with a damp and soft cloth

IMPORTANT!

• To avoid deformation of working surfaces, resulting in decreased atomizing or
  other malfunctions, do not use metallic brushes, blades or talc powder to wipe the atomizer’s surface.

• The water tank may leak after heavy impacts.

• In case of water leakage, immediately stop using the unit and contact an authorized service center.

• To keep the unit dry, wipe the water after cleaning and dry the unit’s base and water tank. Make sure that there is no water left inside the unit’s base and water tank.

• Before a long break in use, dry the base and the tank, but the tank on the base and pack the device in a plastic bag, then put it in a box.

• Store the unit in a low-humidity room.

• Storing the unit undried results in generation of mold.

To clean the water tank and parts of the base of the device from salt deposits, use citric acid:

• for 1 liter of hot water, take 1 tablespoon of citric acid and mix well;

• pour the solution into the tank and put it on the base of the humidifier (water from
  the tank will automatically fall into the base of the device);

• leave the humidifier for 10-12 hours – do not turn it on;

• after the time has passed, remove the solution from the device along with the exfoliated parts of the salt coating;

• if it is difficult to remove plaque – use a special brush for the base of the humidifier (if this is not supplied, you can use a toothbrush). For the tank – pour 0.5-1 cups of dry rice into cold water or a cooled citric acid solution and shake until the plaque is peeled off;

• rinse all internal parts of the device with cool water;

• use a humidifier as usual after the procedure.

TROUBLESHOOTING

device into the intensive mode of operation
productivity)| |
The atomizer is clogged| Clean the atomizer.
| Temperature of water in| Set maximum productivity
| the| mode. The humidifier’s
| tank is low| productivity will go up after
| | a while.
No atomizing| The power cord is poorly connected to the outlet| Connect the power cord intothe outlet carefully
There is white patches from the water on objects around the humidifier (salts, separating out from water)| White patches have formed on the membrane| Clean the humidifier’s membrane with a specialbrush
| There is a lot of salts in the water (calcium andmagnesium)| Use filtered water
Steam has a bad smell| Stale water is used| Clean the unit according to the cleaning and servicing instructions and fill the tank with fresh and filteredwater
| Remains of stale water or waste have accumulated in the unit’s case or theatomizer|
During the operation of the device, condensate is forming on the upper part of the humidifierand on surrounding objects| High humidificationintensity is set.| Decrease the humidification intensity
| Room humidity androom temperature are high|

During the operation of the device water appears next to it

| High humidification intensity is set.| Decrease the humidificationintensity
| The water tank is badly installed on the unit’s base and there is a gap between them.| Turn off the unit and make sure the water tank is installed correctly on the base, without any gaps between the tank and thebase.
| White patches have formed on the membrane and in grooves for water (in theunit’s base).| Clean the unit according to the cleaning and servicing instructions.
Water appears next to thehumidifier, when it is off| Water tank is leaking| Contact anauthorized service center

STORAGE

• Before storage make sure that the appliance is disconnected from power source.
• Perform all actions described in “CLEANING AND MAINTENANCE” section.
• Wash and dry the appliance, place it in the original package and store in a dry place.

UTILIZATION RULES

After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device. The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form.

The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with
the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or anthropogenic accidents.

References

• Timberk - Официальный сайт бренда бытовой техники

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>