CREATIVE EF1081 OUTLIER FREE PRO Wireless Bone Conduction Headphones User Guide

CREATIVE EF1081 OUTLIER FREE PRO Wireless Bone Conduction Headphones

MULTI-LANGUAGE QUICK START GUIDE DOWNLOAD
creative.com/support/OutlierFreePro

REGISTER YOUR PRODUCT
creative.com/register

TECHNICAL SUPPORT
creative.com/support

Overview

1. Magnetic Charging Port
2. LED Indicator
3. Volume + Button
4. Multifunction Button (Power On / Off, Play / Pause, Call / Bluetooth® Connection, Low Latency On / Off)
5. Volume – Button
6. Omni-directional Microphone
7. Microphone Plug (For Swimming)

Multipoint Pairing

Multipoint Pairing

1. Disconnect the headphones from the first mobile device. The headphones will automatically initiate Bluetooth pairing upon disconnection
2. On the second mobile device, select the headphones again from the list of discovered devices to pair
3. Upon successful pairing to the second mobile device, reconnect the first mobile device to the headphones to complete Multipoint Pairing
   Multipoint connection is established when the above steps are performed successfully and Bluetooth is turned on across both mobile devices.

Controls

Powering On / Off

Manually Initiate Bluetooth Pairing

Note: Creative Outlier Free Pro will automatically initiate Bluetooth pairing when powered on for the first time. To manually initiate Bluetooth pairing mode once it’s paired to a device, the headphones has to be powered off first.

Playback Mode

Call Mode

LED Indicators

Transferring Audio Files

1. Power off the headphones to prepare for data transfer
2. Connect the magnetic charging cable to the headphones’ magnetic charging port, then, connect the other end to an available USB-A port on your PC or Mac
3. Outlier Free Pro will be detected as a mass storage device on your PC or Mac. Drag and drop the audio files onto the mass storage device to begin data transfer
4. Once the data transfer is complete, safely eject the mass storage device from your PC or Mac
   Important: Do not disconnect the USB cable while data transfer is in progress. Disconnecting the USB cable without safely ejecting the mass storage device may result in loss of data or damage to the built-in memory

Charging Outlier Free Pro

Ensure that the magnetic charging cable is securely connected to the headphones’ magnetic charging port before connecting it to a power source to charge. If the magnetic charging cable is not secured or if it is connected incorrectly, remove the cable, and reconnect it to the headphones. It is essential for the headphones to be connected securely and properly to the charging cable to prevent short circuit when there is an active current.

Master Reset

• To initiate a Master Reset, enter Bluetooth pairing mode, then press and hold the Volume + and Volume – buttons for 5s. Upon completion, Outlier Free Pro will play a voice prompt of “Power Off” before powering off.
• Master Reset is reserved for cases where users encounter issues while headphones are in use or during situations such as: Bluetooth pairing failure, random LED blinking, or to reset all data.

Preparing To Go Swimming / Underwater

• Attach the provided microphone plug as illustrated to properly secure Outlier Free Pro’s microphone from water or moisture. Ensure that the plug is firmly sealed before going swimming or underwater to prevent potential water damage. If any amount of water has entered through the microphone, immediately remove the headphones and shake off excess water from the microphone.

• If you would like to reduce the length of the microphone plug, cut away the excess as shown.

  • Disclaimer: The microphone plug must be attached before entering the swimming pool or any body of water; the plug should not be attached when you are already in the water. The Outlier Free Pro supports up to a depth of 1.5m for up to 40 minutes at a time. Creative shall not be liable for any water damage if water is found in the microphone or is found to have entered through the microphone if the microphone plug is not used or not properly fitted.
  • Tip: To hear better while swimming, put on the provided silicone earplugs to block out underwater noise and to enjoy a more immersive audio playback experience.

Technical Specifications

• Headphone Drivers: Bone Conduction Transducers
• Frequency Response: 20–20,000 Hz
• Microphones: Omni-directional x 1
• Bluetooth Version : Bluetooth 5.3
• Bluetooth Profiles
  • A2DP (Advanced Audio Distribution Profile)
  • AVRCP (Audio / Video Remote Control Profile)
  • HFP (Hands-free Profile)
• Audio Codec: SBC
• Operating Frequency: 2402–2480 Hz
• Operating Range: Up to 10m / 33 ft
• Voice Assistant Support: Siri and Google Assistant
• Built-in Memory Capacity: 8 GB
• Supported Music Formats: MP3, FLAC, WAV, APE
• Playtime: Up to 10 Hours*
• Charging Time: 2 Hours
• Charging Interface: USB-A (Charging and Data Transfer)
• Battery Type: Rechargeable Lithium-ion Polymer Battery 180 mAh 0.666 Wh
• Input: 5V 1A
• Operating Temperature: 0–45°C
• Maximum RF Output Power: 4 dBm
• IP Rating: IPX8**
  • Based on moderate volume level. Actual battery life will vary with use, settings, songs, and environmental conditions
  • Protected against submersion in freshwater up to a depth of 1.5m for up to 40 minutes. IPX8 rating does not include submersion in salt water or liquids with similar properties

References

• Creative Technology - Online Product Registration
• Creative Worldwide Support
• Creative Worldwide Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>