SIGNATURE HARDWARE 483607 Brass Console Bathroom Sink Installation Guide
- June 9, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 483607 Brass Console Bathroom Sink
GETTING STARTED
Ensure that you have gathered al the required materials that are needed for the installation
Tools required
INCLUDED HARDWARE
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the faucet. plumbing, sink, counter top, or for personal injury during installation. Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team via live chat at www.signaturehard- ware.com or by emailing support @signaturehard-ware.com.
INSTALLATION
- Assemble the side frame and side tube to the front frame. Using Allen wrench, Secure with provided hardware.
- Place console stands in the mounting location. Mark the center of mounting points on wall
- Drill pilot holes in marked locations on the wall. Insert wall anchors into mounting holes.
- Attach mounting blocks to the bottom mounting hole. Using a drill, secure it to the wall with provided hardware.
- Slide side rails into position on the mounting block. Using a drill, secure the top rail to the wall using provided hardware.
- Using an Allen wrench, secure the slide rail to the mounting block with provided hardware.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>