ALPINE HDZ-65 Speakers Owner’s Manual
- June 4, 2024
- Alpine
Table of Contents
ALPINE HDZ-65 Speakers
CONTENTS
EXTERNAL DIMENSIONS
WIRING CONNECTION
INSTALLATION
SPECIFICATIONS
| Units Type | Woofer | 6-1/2”(16.5 cm) Carbon Cone |
|---|---|---|
| Tweeter | 1”(2.5 cm) Carbon Cone | |
| Maximum Peak Power | 300 Watts in system | |
| Maximum RMS Power | 100 Watts in system | |
| Impedance | 4 ohms | |
| Sensitivity | 88 dB SPL (2.83 V @ 1 m) | |
| Frequency Response | 55 Hz to 40 kHz | |
| Mounting Deps/ Drop-in Mounting | Woofer | 2-3/4” (6.7 cm) |
| Cutout Diameter | Woofer | 5-5/8” (14.2 cm) |
| Recommended Amplification | Up to 100 watts RMS. per channel |
- Design and specifications are subject to change without notice.
[Warning]
- RMS Power / Peak power specified on this product is the value in Coaxial 2way (HDZ-65) system. Removing attached network will void your warranty.
- This product contains a high-performance tweeter.
If there is a tweeter already installed in your car, you must disconnect its
terminal.
If you leave the original tweeter connected and connect this product in
parallel, fault may occur in this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>