ATEN PE6216 16-24-Outlet Metered and Switched eco PDU User Guide

ATEN PE6216 16-24-Outlet Metered and Switched eco PDU User Guide

Requirements

• Browsers accessing the eco PDU unit must support SSL 128-bit encryption.

• For cold booting of attached computers, the computer’s BIOS must support Wake-on-LAN or System after AC Back.
  For safe shutdown:

• The computer must be running Windows (Windows 2000 or later) or Linux.

•  The Safe Shutdown program (available by download from our website), must be installed and running on the computer.

Hardware Overview

1. power inlet (PE6216) / power cord (PE6324)
2. circuit breaker pushbutton (PE6216) / circuit breakers (PE6324)
3. power outlets
4. sensor ports
5. LAN port and LEDs
6. readout section & reset switch
7. outlet status LEDs
8. readout panel page, and then download the installer from the Support and Downloads tab.
9. power, current, IP address & sensors LEDs
10. reset switch
11. selection pushbutton
    
    Readout Section
    

Package Contents

• 1 PE6216 / PE6324 eco PDU
• 1 Power Cord (Only for PE6216)
• 1 Mounting Kit
• 1 User Instructions

Rack Mounting

The PE6216/PE6324 can be installed in a 0U configuration on the side of a rack.
To rack mount the device, use the mounting brackets that came with your device.
The brackets can be mounted either near the top and bottom of the back panel, or the top and bottom ends of the device.
Note: For safety reasons the eco PDU should not be installed with the power sockets facing directly up from or down toward the ground, and thus should only be installed with the power sockets facing out from a vertical position.

Installation

1. For each device you want to connect, use its power cable to connect from the device’s AC socket to any available outlet on the eco PDU.
2. Plug the cable that connects the eco PDU to the LAN into the eco PDU’s LAN port.
3. To use sensors in your eco PDU installation, connect them to the sensor ports on the unit’s front panel.
4. Connect the eco PDU’s power cord to an AC power source.
   Note: We strongly advise that you do not plug the eco PDU into a multi socket extension cord, since it may not receive enough amperage to operate correctly.
   Once you have finished these installation steps, you can turn on the eco PDU and the connected devices.

Securing the Cables

For added safety, we advise that you secure all the cables in place with ATEN LockU-Plug cable holders.
Secure the cable holders using the specially designed holes onto the eco PDU around the individual power outlets.

Operation

eco PDU models provide three methods to access and manage your installation:
Browser, eco DC (Energy & DCI Management Web GUI), and SNMP.

Browser

eco PDU can be accessed and controlled via any supported Internet browser from any platform.
To operate the eco PDU from an Internet browser, begin by logging in:

1. In a web browser, type the IP address of the eco PDU unit.
   Note: The default IP address is 192.168.0.60

2. If a security alert appears, accept the certificate — it can be trusted.
   The login page appears.

3. Enter a valid username and password, and then select a language.
   Note: The default login credentials are administrator and password. 4 Click Log In to bring up the main page.

eco DC
All eco PDUs support eco DC (Energy & DCIM Management Web GUI).
eco DC provides you with an easy method for managing multiple devices, offering an intuitive and user-friendly GUI that allows you to configure a PDU device and monitor power status of the equipment connected to it.
To install the software, scan the eco DC QR code to visit the product web page, and then download the installer from the Support and Downloads tab.

SNMP
eco PDUs support any 3rd party V1, V2 & V3 SNMP Manager Software.
To install the software, scan the ATEN Website QR code to visit the product web 8 readout panel page, and then download the installer from the Support and Downloads tab.

Support and Documentation Notice

All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and software can be found online at
http://www.aten.com/download/

Scan for more information

ATEN Website (PE6216)
Scan Me

User Manual
_Scan Me

_

ATEN Website (eco DC)
Scan Me

Technical Support

www.aten.com/support

References

• ATEN - Simply Better Connections | ATEN U.S.A.
• Downloads | ATEN Corporate Headquarters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>