Hytera PNC360S Ultra-Compact PoC Radio User Guide

: June 9, 2024
: Hytera

Table of Contents

PNC360S Product Overview
Before Use
Basic Operations
Pock Services
Specifications
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hytera PNC360S Ultra-Compact PoC Radio User Guide

PNC360S Product Overview

Product Overview

Before Use

Installing the Nano SIM Card

Remove the battery cover with a proper tool.
- The battery cover is tightly fastened to ensure optimum waterproof performance. Therefore, you need to remove the battery cover with a proper tool.
- Do not remove the battery cover by force.
Open the SIM card slot cover.
Install the SIM card.
Put the card slot cover back in place

Attaching the Battery

Caution

Use the approved battery to avoid the risk of explosion.
Dispose of the used battery according to “Precautions for Disposal” in the Safety Information Booklet.

Attach the battery as shown below, and then attach the battery cover back.
Installation Instruction

**Attaching the Belt Clip

**

Attaching the Audio Accessory

Open the audio jack cover, and then insert the audio accessory into the jack.

To ensure optimum waterproof and dustproof performance, close the audio jack cover after disconnecting the audio accessory

Caution

Use the approved charger to charge the battery.
Read the Safety Information Booklet before charging.
The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment regulation approved by the International Air Transport Association (IATA).

Before initial use, charge the battery.

To charge the battery, connect the product to a power adapter, power bank, or computer with the USB cable.

To determine the charging status, check the battery icon shown on the LCD display.

To ensure optimum waterproof and dustproof performance, close the USB Type-C port cover after charging the product.

Basic Operations

Turning on/off the Product

To turn on the product, long press for two seconds.
To turn off the product, long press for two seconds, and then select Power off

Adjusting the Volume

To increase the volume, press the Volume + key.
To decrease the volume, press the Volume – key.

Locking/Unlocking the Screen

To lock the screen, go to Settings > Screen locked to enable the feature.
If the product is not operated for a specific duration, the screen will be automatically locked.
To unlock the screen, press and .

Connecting to the Network

To connect to the cellular network, install the Nano SIM card and activate the cellular data service.

Checking the Device Information

To check the information such as model, serial number, and version, go to Settings > About phone.

Pock Services

You can use Push-to-Talk over Cellular (Pock) services such as one-to-one or one-to many voice call over the public network.

To initiate a call, do as follows.
- a. Select a contact.
- b. Press and hold the PTT key, and then speak.
- c. Release the PTT key.
You can receive a call without any operation.

Specifications

Model| PNC360S
**** Frequency Range|

FDD-LTE: B1/B3/B7/B8/B20/B28l
TDD-LTE: B38/B40l
WCDMA: B1/B3/B8l
GSM: 900/1800l
BT: BT4.2l
WIFI: 2.4GHz, 802.11b/g/n20/n40l GPS:
GPS/Galileo/GLONASS/BeiDou

Tx Power|

GSM900: 32.5dBml
DCS1800: 29.5dBml
WCDMA B1/B3/B8: 24dBml
FDD-LTE (B1/B3/B7/B8/B20/B28): 24dBml
TDD-LTE (B38/B40): 24dBml
BT: 3dBml
WIFI: 17dBm

| disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;leaving a battery in an extremely high temperature surrounding environment that can result i n an explosion or the leakage of flammable liquid or gas;a battery subjected to extremely low air pressure that may result in an explosion or the leaka ge of flammable liquid o gas