FOCAL SOLO6 ST6 6.5-inch Powered Studio Monitor User Guide
- June 13, 2024
- FOCAL
Table of Contents
ST6
SOLO6 – TWIN6 – TRIO6 – SUB12
Quick Start
SOLO6 ST6 6.5-inch Powered Studio Monitor
GO
TO THE USER MANUAL
https://www.focal.com/ST6/usermanual
IMPORTANT SAFETY INSTRUCTIONS!
The bolt of lightning in an equilateral triangle warns the user that the
device has high voltage that could result in a risk of electric shock.
WARNING: To prevent any risk of electric shock, do not remove the cover
(or the back) from the device. There are no user-serviceable parts in this
device. For maintenance or repairs, contact a qualified professional.
Warning symbol. This symbol is designed to warn the user of the presence of
important instructions mentioned in the user manual and relating to the
handling, operation and maintenance of the device.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized plug (common). A polarized plug has two blades with one wider than the other. The wide bladed is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/ accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Only connect this product to the type of mains electrical supply indicated on the device. If you are unsure what type of mains electrical supply is required for the product or your electrical installation, ask your installer or your electricity supplier. For devices intended for use with a battery or another power source, see the user manual.
- This product is a Class 1 appliance. Only plug in the device using the mains plug provided, which incorporates an earth connection. The device must be plugged into an earthed mains socket.
- Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. To disconnect the equipment from the mains remove the mains plug from the mains outlet.
- Do not overload wall sockets, extension leads or multiple socket outlets. This could cause fire or electric shock. Make sure that the maximum permissible power of each component of the installation is not exceeded.
- WARNING: To reduce the risk of fire or electric shock, do not expose this device to water, rain or moisture. In addition, the device must not be exposed to dripping or splashing liquid and no objects filled with liquids, such as vases, should be placed on the device.
- Do not insert any objects into the device’s ventilation openings. They could come into contact with one of the high-voltage components or short-circuit them and cause a fire or electric shock.
- When using the device, the ambient temperature should not exceed 95°F (35 degrees Celsius).
- Do not use this device in tropical climates.
- Do not use this device at altitudes of more than 2,000 m (6,500 ft).
- If the device has been transported from a cold environment to a warm environment, make sure no condensation has accumulated before connecting the power cable.
- Always leave a distance of at least 5cm (2″) around the product for proper ventilation.
- Do not place naked flame sources, such as lit candles, near the device.
- The appliance should only be mounted on a wall or ceiling if the manufacturer allows for this.
- This product has sharp corners. Handle it with care.
- Do not attempt to repair this device yourself. Opening the device may be dangerous. Contact a qualified professional for all work on the device.
- When replacement components are needed, use only the components specified by the manufacturer or components with identical technical features to those of the original product. Using non-compliant components could cause fires, electric shocks or other risks.
- After any maintenance or repair work on the device, test it to check that it is working safely.
- Turn the source to minimum before connecting the products and turning up the volume. Once the products are in place, gradually increase the volume to a reasonable and comfortable level.
- To avoid damaging your hearing, do not listen to loudspeakers at high volumes for long periods of time. Listening to loudspeakers at an excessive volume can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis). Exposing your ears to a volume higher than 85dB SPL-LAeq for several hours can irreversibly damage your hearing.
- After removing the product from its packaging, keep the packaging out of the reach of children. It could present a suffocation risk.
- Some users who are not self-sufficient enough to use the product on their own without danger. In particular, children under 14 or people with some types of disabilities must be supervised and/ or accompanied when using the device.
USA: Federal Communication
Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. However, there is no guarantee that interference
will not occur in a particular installation.
Canada: Industry Canada Statement This device complies with ISED’s licence-
exempt RSSs. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
REGISTER YOUR PRODUCT ONLINE
http://www.focal.com/warranty/
Scan QR code for information
on packaging disposal
https://www.focal.com/regulatory-
product-information
Focal-JMlab® – BP 374 – 108, rue de l’Avenir
42353 La Talaudière cedex – France
www.focal.com
Tel. (+33) 04 77 43 57 00
Fax (+33) 04 77 43 57 04 – SCCG
– 04/05/2023 – v1 – CODO3022
References
- Top-of-the-range speakers and hi-fi equipment | Focal
- Top-of-the-range speakers and hi-fi equipment | Focal
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>