MUSIC HERO MHHEADLIGHPOPBTW Wireless Stereo Light Pop Headphone User Manual
- June 1, 2024
- MUSIC HERO
Table of Contents
MHHEADLIGHPOPBTW Wireless Stereo Light Pop Headphone
User Manual
STEREO
WIRELESS LIGHT POP
HEADPHONE WITH LED LIGHT
SPECIFICATION
Wireless 5.3
Working range: 10m
Battery capacity: 400 mAh
Power Input: 5 V D.C. 1A Max
Audio frequency:
20Hz-20kHz
Sensitivity: 102 dB
Impedance: 32Ω
Type-C Port
Playing time: 20 hours
Charging time: 2 hours
Standby time: 120 hours
ƒ: 2402 ÷ 2480 MHz
PRF: 6 mW Max
For other informations please contact us at [email protected]
POWER ON AND PAIRING
- Press the button A for 7 seconds till the LED starts blink red and blue.
- Open your smartphone Bluetooth® setting and chose “MH LIGHT POP”
INCREASE/DECREASE THE VOLUME
Press and keep pressed the button + do increase the volume.
Press and keep pressed the button – to decrease the volume.
POWER OFF
Press and hold the button A for 7 seconds till the LED turns off
NEXT/PREVOIUS SONG
Short press the button + to go to the next song.
Short press the button – to go to the previous song.
PLAY/PAUSE MUSIC
Press one time the button A to start the music (after the headphone is
connected to the smartphone)
Press one time the button A to pause the music while you are listening to
music
CHARGE THE HEADPHONE
Insert the Type-C connector into the headphone’s Type-C port and the USB connector into a PC USB port or a travel charger. The LED will turn on RED light, when the charge is completed the LED will turn OFF.
ANSWER /END BUTTON
Press one time the button A to answer a phone call.
Press one time the button A to end a phone call.
Made in China
MHHEADLIGHPOPBTW
©2024 SBS SpA
[email protected]