MIBOXER WL-Box1 Mi-Light Mostek Wi-Fi DC5V 500mA Instruction Manual
- June 9, 2024
- MiBOXER
Table of Contents
MIBOXER WL-Box1 Mi-Light Mostek Wi-Fi DC5V 500mA
Please read the instructions carefully before using the controller.
Features
Compatible with 2.4GHz RF products; and controlled by Mi Boxer APP through WiFi or 4G network.
Can control
2.4GHz RF series product
16 Millions of colors to choose
WiFi Wireless
Control
Color
temperature 2700K~6500K
2.4GHzRF
transmission tech
Dim
brightness/Saturation
Smartphone App
control
Timing ON/OFF the lights
Support amazon alexa and google assistant control
Parameters
Model No.: WL-Box1
Input: DC5V/500mA (Micro USB)
Working Temperature: -20~60°C
Communication Mode: WiFi-lEEE 802.11 b/g/n 2.4GHz
RF: 2.4GHz Transmitting Power: 6dBm
Product Weight: 23g
SET button
Long press “SET” 3 seconds to smart link mode, SYS pilot lamp blinking.
Note: Factory setting is Smart Link mode by default
Installation
Please install the device within 30m as lights, and approaching the WiFi Router.
Pilot lamp illustrate:
| De v ice s tatus | SYS pilot lamp | Link pilot lamp |
|---|---|---|
| Smart link mode | Blinking | OFF |
| Networkingsuccessfully | OFF | ON |
| Received signal | OFF | Blinking |
| Disconnected from network | ON | ON |
| Device malfunction | Blinking | Blinking |
User Instruction
- Install MI Boxer APP. Click” + “add devices( See details on MiBoxer APP instructions).
- Click “2.4G Gateway” on the device list to enter control interface.
- Click “Change” to select compatible remote for the lights(Note: If you select wrong remote, you cannot control the lights).
- Click “Link/Unlink”.
- Link/Unlink method, See details on APP link/unlink instruction.
- After linking successfully, back to the control interface to control the lights randomly.
Zone selection
Click the “Zone” on the left bottom into the Zone selection. Note: Please select the linked Zone, otherwise it cannot control the lamps.
Timer:
When the device get into Smart Link mode and re-configure, all the timers on this device will be deleted.
Attention
- Before installation, please check the output voltage is in accordance with the device Rated Voltage.
- The input voltage is DC5V/500mA, Please do not connect the power supply over DC5V, otherwise, the device will be broken easily.
- Non-professional user cannot dismantle the divice directly, otherwise, it may damage the divice.
- The working temperature is -20-60°C; Do not install the device to direct sunlight, moist and other high temperature area.
- Please do not install the device around the mental area and high magnetic field, otherwise, it will badly affect the control distance.
Mi Boxer APP User Instruction
APP Downloading
For IOS System: Pis search “MI Boxer” on APP store. (Above IOS9.0)
For Android System: search “MI Boxer” on Google Play (Above Android 5.0) or
Scan below QR-code to download APP.
Scan QR Code to Install APP
Register Mi Boxer Account
Open APP and click Register button; Complete the register and log in.
Add Device
- Click the right top”+” on the device list.
- Please select the device type you will add, then complete the adding according to the hint of APP.
- Back to device list after adding successfully, then pull down refresh in list to get the device status.
Modify device name or delete device
Slide device list to left, click ” Edit” to modify device name; click II
Delete II to delete device.
Note: If the device was shared to others, then the device will also be
deleted on your friends’ device list.
APP Control
Click the device that you want to dim on device list into dimming Interface
Click speed+ under dynamic mode.
Click speed- under dynamic mode.
Third Party Voice Control instructions
Search “Mi-Light Smart” on third-party platform APP and set up.
Click left top ” “ icon on the home page;
Then click” ” to check detailed instructions.
Note: The third party voice just control the lamps linked on selected
remote. (Not support Zone control)
Sharing Device
Share the device to friends, Let your friends can control this device.
-
Click the left top” **** ” icon on the home page.
-
Click ” “to My sharing, then click “Add sharing”
(Note: the receiving sharing device cannot be shared again). -
Click ” ” to edit sharing, slide to left to delete sharing .
Scan QR code to watch video instruction
Documents / Resources
|
MIBOXER WL-Box1 Mi-Light Mostek Wi-Fi DC5V
500mA
[pdf] Instruction Manual
WL-Box1 Mi-Light Mostek Wi-Fi DC5V 500mA, WL-Box1, Mi-Light Mostek Wi-Fi DC5V
500mA, Wi-Fi DC5V 500mA
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>