Hytera BD612i Rugged Commercial Two-Way DMR Radios User Guide

Hytera BD612i Rugged Commercial Two-Way DMR Radios

Product Overview

Product Layout

Programmable Key
For enhanced convenience, you can request your dealer to program SK as a shortcut to a radio feature. Consult your dealer for assignable radio features.

LED Indications

channel during a call. Within such a period, you can press and hold the PTT key and speak.

Basic Operations

Charging the Battery

• Read the Safety Information Booklet before charging.
• Use the approved charger to charge the battery.
• The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment regulation approved by International Air Transport Association (IATA).

Before initial use, make sure to charge the battery. You can charge either the standalone battery or the radio with battery attached. It is recommended that the radio remain powered off during charging. The LED indicator on the charger shows the charging status. For details, see the following table.

charged.

• Turning the Radio On or Off
  To turn the radio on or off, rotate the On-Off/Volume Control knob clockwise or counter-clockwise until you hear a click.

• Adjusting the Volume
  To increase or decrease the volume, rotate the On-Off/Volume Control knob clockwise or counter-clockwise.

• Selecting a Zone
  A zone is a group of channels within the same operational area. The radio supports up to 3 zones, each of which contains up to 16 channels.
  To select a zone, press the preprogrammed Zone Up or Zone Down key.

• Selecting a Channel
  To select a channel, rotate the Channel Selector knob. If the Channel Notify feature is enabled, the radio automatically announces the current channel upon power-on and channel change.

Call Services

When you are speaking during a call, keep the microphone about 2.5 to 5 cm away from your mouth. This ensures optimal voice quality on the receiving radio.

Call on Digital Channel **

**

You can initiate or receive the following types of calls on a digital channel:

• Private call: a call from an individual user to another individual user.
• Group call: a call from an individual user in a group to all the other members in the group.
• All call (enabled by your dealer): a call from an individual user to all other users on the current channel.

Initiating a Call

• On the home screen, rotate the Channel Selector knob to select the required channel, and then press and hold the PTT key to initiate a call to the private/group/all call contact preset on the channel.
• If the One Touch Call feature is configured by your dealer, press the preprogrammed One Touch Call key, and then press the PTT key to initiate a call to a private or group contact.

Receiving and Responding to a Call
You can listen to an incoming call without any operation. To respond to a private or group call, press and hold the PTT key within the preset time.

Ending a Call
A private/group call ends when the call hang time expires.

• An all call ends when the calling party releases the PTT key.

Call on Analog Channel (Without Signaling)
You can initiate a call to all other users on the current analog channel. The operations are the same as those on digital channel.

Hytera US Inc.
8 Whatney,
Irvine, CA 92618
949-326-5742

1363 Shotgun Road,
Sunrise, FL 33326
954-846-1011
www.hytera.us
info@hytera.us

Hytera Canada
100 Leek Crescent, Unit 11
Richmond Hill, ON L4B 3E6
905-305-7545
www.hytera.ca
info@hytera.ca

References

• Hytera Canada - The Leader in Two-Way Radio Communications
• Hytera US Inc - The Leader in Two-Way Radio - Official USA Site

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>