SEURA DIFFUSERS Lumin Design 18 Inch W x 60 Inch H Lighted Full Length Mirror Instructions
- June 9, 2024
- SEURA
Table of Contents
DIFFUSERS
SÉURA LIGHTED MIRRORS
No Diffusers Needed
DIFFUSERS Lumin Design 18 Inch W x 60 Inch H Lighted Full Length Mirror
Diffusers are translucent plastic strips that attach to the sides of the mirror to reduce glare from looking directly at standard LED lights. You no longer need them on Séura Lighted Mirrors with Radiant COB LED Technology™, and that’s a good thing!
The purpose of diffusers is to eliminate the visible hot spots from individual
LEDs when viewing the mirror from the side. The drawbacks to diffusers are (a)
they reduce brightness (measured in foot candles or usable light) by
approximately 20%, (b) they add cost and (c) they negatively impact the clean
look most designers are going for.
COB LEDs are much smaller and lower profile than traditional LEDs, so we can
fit many times more LEDs in the same amount of space and place them closer to
the mirror etch which eliminates hot spots and provides a more consistent
light source, even when viewed from the mirror side. With COB LEDs, there’s no
need for diffusers since the light source is already diffused.
1230 Ontario Road Green Bay, Wisconsin 54311
1-800-957-3872
contacts@seura.com
www.seura.com
Information is subject to change without notice.
©2021 Séura
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>