FEISS P1258 Lucia Pendant Instruction Manual
- June 9, 2024
- FEISS
Table of Contents
FEISS P1258 Lucia Pendant
Instruction
GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations. Incandescent lamps may be
dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer for
additional information.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
- Determine the desired height with the provided stems and assemble them by screwing them together.
- Feed the fixture wires through the stem assembly and screw it onto the fixture.
- Feed the fixtures wires through the fixture loop and screw it onto the stem assembly.
- Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
- Install the quick chain link by twisting the knob to open the link, then install it onto the canopy and fixture loop. Close the link to secure in place.
- Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 – 847.626.6300
www.Feiss.com
© 2017 Feiss.All rights reserved.The “Feiss” graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>