TOURATECH 01-037-5130-0 Cylinder Protection Instruction Manual
- June 12, 2024
- Touratech
Table of Contents
TOURATECH 01-037-5130-0 Cylinder Protection
We recommend having the accessory parts fitted by a specialist workshop.
-
Caution
-
Note
-
Warning
-
Liquid
-
Torque
-
Template
-
2 Persons
-
Original motorcycle part
-
These instructions are written based on our current state of knowledge, information is provided without any guarantee as to its accuracy. Subject to technical modifications.
-
The order of assembly steps must be followed.
-
Touratech accepts no liability for incorrectly fitted parts and resulting material damage or personal injury:
-
Please observe applicable road vehicle (construction and use) regulations as well as
-
EC/ECE Directives and applicable laws in your country. If parts are fitted which require inspection and/or approval after tung take your vehicle to a testing station immediately and have the vehicle papers updated.
-
Check and if necessary tighten all bolted connections after 50 km.
-
Standard tightening torques in Nm for bolted connections with strength class 8.8.
-
For special tightening torques refer to your specialist workshop!
-
Please take into account that fitting panniers, crash bars, foot peg lowering kits (rider and billion Kickstand enlaramentolate, front spoilers, and engine guards may restrict the Dike’s lean angles
-
It Modifications are made to the fairing, stem, handlebar, fairing parts, etc., to ensure that electrical wiring, brake lines, accelerator, and clutch cables are rented correctly. Check clearance, both sides with a full steering lock
-
Always disconnect the battery when working on the electrics!
-
We recommend cutting the protective film to size and applying it to impact areas that are likely to be chipped by stones.
-
Work on the brake system and suspension should always be carried out by a specialist workshop.
-
The maximum load on luggage racks is 5 kg! Luggage racks ZegaPro TC is 10 kg!
-
If other original accessories or aftermarket accessories are used, ensure clearance, and fitment and do not come into contact with other parts!
-
Apply conventional lubricant to stainless steel bolts prior to assembly.
-
PDF fitting instructions also can be downloaded from the Touratech webshop.
Mounting instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>