FEISS OLF3295-9 Hilo Outdoor Chandelier Instruction Manual
- June 9, 2024
- FEISS
Table of Contents
FEISS OLF3295-9 Hilo Outdoor Chandelier
GENERAL PRODUCT INFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent dimmer. LED
version may be dimmed with a LED dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
- Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
- Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
- Install the shades by placing the gaskets into the shade bases, then screwing the shades into the shade bases. Screw the tubes into the fixture.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 160077
800.969.3347
www.Feiss.com
© 2018 Feiss. All rights reserved. The “Feiss” graphic is a registered
trademark of Feiss. Feiss reserves the right to change specifications for
product improvements without notification.
A Generation Brands Company
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>