Neomounts WL15-660WH1 Tablet Mount Holder Instruction Manual
- July 10, 2024
- Neomounts
Table of Contents
Neomounts WL15-660WH1 Tablet Mount Holder
Product Information
Specifications
- Dimensions: 196mm x 28.5mm x 18mm
- Weight: 348mm
- Material: Plastic
- Model: WL15-660WH1
Product Usage Instructions
Step 1: Tablet Placement
Unlock the holder
Step 2: Attaching Holder to Adapter Plate
Remove the cover and place the tablet in the holder.
Step 3A: Wall Mount Installation
Attach the holder to the adapter plate or bracket.
Step 3 B-1: Mounting on Wall
Remove the screws and install the holder on a stud wall.
Step 3 B-2: Mounting on Wall
Install the holder on a stud wall
Step 3 B-3: Mounting on Wall
Install the holder on a solid brick or concrete wall. 
Step 4: Final Tablet Placement
Place the tablet in the holder.
Step 5A: Locking the Holder (Camera Visibility)
Make sure the camera is visible through the opening and lock the holder.
Step 5B: Final Wall Mounting
Tighten the screws securely.
Dimensions
Tablet mount
Parts
Safety Instructions
Caution
- To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
Frequently Asked Questions
Q: What tablet sizes are compatible with this mount?
A: This mount is designed for tablets up to 12.9 inches, suitable for iPad Pro (Gen 3/4/5/6).
Q: Can the holder be mounted on a concrete wall?
A: Yes, the holder can be installed on a solid brick or concrete wall following the provided instructions.