FEISS F3225-6 Broderick Chandelier Instruction Manual
- June 9, 2024
- FEISS
Table of Contents
FEISS F3225-6 Broderick Chandelier
GENERAL PRODUCT INFORMATION
- These fixtures are intended to be installed utilizing NEC compliant junction boxes.
- This product is safety listed for damp locations.
- Incandescent lamps may be dimmed with a standard incandescent dimmer.
- LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information.
- This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
OVERVIEW
INSTALLATOIN
- Feed the fixture cord through the hub stem and screw it onto the socket assembly.
- Insert the frames into the slots on the socket assembly, then secure the other ends to the top of the hub using the screws.
- Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.
- Install the candle tubes by sliding them over the sockets.
- Install the candle followers by placing them on top of the candle tubes.
- Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
- Install the shades over the sockets and onto the shade bases.
- Screw the finials to the bottom of the socket assembly.
7400 Linder Ave, Skokie, IL 160077
800.969.3347
www.Feiss.com
© 2018 Feiss.All rights reserved.The “Feiss” graphic is a registered trademark
of Feiss. Feiss reserves the right to change specifications for product
improvements without notification. A Generation Brands Company.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>