FEISS OLF3294-5 Allier Outdoor Chandelier Instruction Manual
- June 9, 2024
- FEISS
Table of Contents
Chandelier
Installation Instructions for Allier Outdoor Chandelier
OLF3294/5 1.0
GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent dimmer.
LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
- Carefully spread the fixture arms until they are equally spaced apart.
- Feed the fixture wires through the fixture and coupler, then secure the stem to the fixture by screwing the coupler onto the stem.
- Feed the fixture wires through the nipple and screw it onto the coupler.
- Feed the fixture wires through the upper cup, washer, and fixture loop, then secure them in place by screwing the fixture loop onto the nipple.
- Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
- Install the shades by placing them over the lamps and screwing them into the shade bases.
- Install the cover to the lower plate from the inside of the fixture, then place the lower cup onto the bottom of the lower plate and secure them together using the finial.
- Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box. 1
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 160077 800.969.3347
www.Feiss.com
© 2018 Feiss. All rights reserved. The “Feiss” graphic is a registered
trademark of Feiss.
Feiss reserves the right to change specifications for product improvements
without notification.
A Generation Brands Company