Sea Gull Lighting 8224401 Sauganash 1 Light Outdoor Post Lantern Instruction Manual
- June 9, 2024
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 8224401 Sauganash 1 Light Outdoor Post Lantern
GENERAL PRODUCT INFORMATION
- This product is safety listed for wet locations.
- This product may be dimmed with a standard incandescent dimmer.
- This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved. Use minimum 90°c supply conductors.
If you need installation assistance, replacement parts, or have questions regarding our warranty, please call our customer care center:
Warranty
Sea Gull Lighting fixtures and components, when properly installed and under normal conditions of use, are warranted to be free from defects in materials and workmanship for one year from date of sale. LED light sources are warranted for five years. ENERGY STAR® labeled products are warranted for three years. Sea Gull Lighting at its sole option will repair or replace, F.O.B. Factory, freight prepaid, any Sea Gull Lighting product defective in materials or workmanship. Such replacement is the exclusive remedy against Sea Gull Lighting should any of the products delivered prove defective. Invoices for labor charges and/or charge backs for labor will be denied unless prior written approval is given. Any modification to a Sea Gull Lighting product not made at the factory will void the UL or ETL listing as well as the Sea Gull Lighting warranty policy. To register your fixture, please visit our website: SeaGullLighting.com
Install the Fixture
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Secure the fixture to the post with post screws.
- Screw the lamp into the socket.
- Align the frame to fixture and secure them together using the small washers and thumb nuts.
- Place the top cover and finial washer over the threaded nipple and secure them in place using the finial.
7400 Linder Ave, Skokie, IL 60077 800.323.3226 – 847.626.6300 www.SeaGullLighting.com © 2015 Sea Gull Lighting.All rights reserved.The “Sea Gull Lighting” graphic is a registered trademark of Sea Gull Lighting. Sea Gull Lighting reserves the right to change specifications for product improvements without notification. A Generation Brands Company
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>