Sea Gull Lighting 84030 Kent 1 Light Outdoor Wall Instruction Manual
- June 9, 2024
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 84030 Kent 1 Light Outdoor Wall
GENERAL PRODUCT INFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for wet locations.
Incandescent version may be dimmed with a standard incandescent dimmer. LED
version may be dimmed with a LED dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
NEED HELP?
If you need installation assistance, replacement parts, or have questions regarding our warranty, please call our customer care center:
Warranty
Sea Gull Lighting fixtures and components, when properly installed and under normal conditions of use, are warranted to be free from defects in materials and workmanship for one year from date of sale. LED light sources are warranted for five years. ENERGY STAR® labeled products are warranted for three years. Sea Gull Lighting at its sole option will repair or replace, F.O.B. Factory, freight prepaid, any Sea Gull Lighting product defective in materials or workmanship. Such replacement is the exclusive remedy against Sea Gull Lighting should any of the products delivered prove defective. Invoices for labor charges and/or charge backs for labor will be denied unless prior written approval is given.
Any modification to a Sea Gull Lighting product not made at the factory will void the UL or ETL listing as well as the Sea Gull Lighting warranty policy.
To register your fixture, please visit our website: SeaGulllighting.com
Install the Fixture
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire to the neutral power line wire with a wire nut.
- Connect the black fixture wire to the hot power line wire with a wire nut.
- Align and place the fixture base onto the mounting plate studs and secure it with the two cap nuts.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
- Place the cover onto the fixture studs and secure it in place with the cap nuts.
- For wet locations, caulk around the base of the fixture with waterproof construction sealant.
Customer Support
7400 Linder Ave, Skokie, IL 60077
800.323.3226 – 847.626.6300
www.SeaGullLighting.com
Cl 20 17 Se, Gull Li(laic rights ne, e,-.n,,, “Se> Gull L\gating( gr.tphic i,
r<e;i•ter<edtr.tdern>ri< o/Seagulls lightin,:.Seagulls light ngne..,,v,e,therightto
change •~ifi<>tion< for produce< lmp~ments walkout, notify>don.
A Generation Brands Company
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>