Sea Gull Lighting 4_4040 Driscoll 1-2-3 and 4 Light Wall Instruction Manual
- June 9, 2024
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 4_4040 Driscoll 1-2-3 and 4 Light Wall
GENERAL PRODUCT INFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
This product may be dimmed with a standard incandescent dimmer.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
NEED HELP?
If you need installation assistance, replacement parts, or have questions regarding our warranty, please call our customer care center:
Warranty
Sea Gull Lighting fixtures and components, when properly installed and under normal conditions of use, are warranted to be free from defects in materials and workmanship for one year from date of sale. LED light sources are warranted for five years. ENERGY STAR® labeled products are warranted for three years. Sea Gull Lighting at its sole option will repair or replace, F.O.B. Factory, freight prepaid, any Sea Gull Lighting product defective in materials or workmanship. Such replacement is the exclusive remedy against Sea Gull Lighting should any of the products delivered prove defective. Invoices for labor charges and/or charge backs for labor will be denied unless prior written approval is given.
Any modification to a Sea Gull Lighting product not made at the factory will void the UL or ETL listing as well as the Sea Gull Lighting warranty policy.
To register your fixture, please visit our website: SeaGullLighting.com
Install the Fixture
-
Secure the mounting plate to the electrical box with two mounting plate screws. Note: For single light fixture, mounting plate studs must face horizontally.
-
Connect the fixture to a suitable ground in accordance to local electrical codes.
-
Connect the white fixture wire to the neutral power line wire with a wire nut. 19
-
Connect the black fixture wire to the hot power line wire with a wire nut.
-
Align then place the fixture base onto the mounting plate studs and secure it with the two ball nuts.
-
Place the shade and spacer onto the shade base and secure them in place by installing and tightly screwing the shade
collar nut onto the socket; repeat for all shades -
Screw the lamps into the sockets.
Customer Support
7400 Linder Ave, Sko kie. IL 60077
800.323.3226 – 847.626.6300
www.SeaGullLighting.com
© 20 IS Sea Gull Lighting. All rights reserved.The “Sea Gull Lighting” graphic
is a
registered trademark or Sea Gull Lighting. Sea Gull Light ing reserves the
right to
change specifications for product improvements without notification.
A Generation Brands Company
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>