Sea Gull Lighting 4480 Holman 2-3 and 4 Light Wall Instruction Manual
- June 9, 2024
- Sea Gull Lighting
Table of Contents
Sea Gull Lighting 4480 Holman 2-3 and 4 Light Wall
GENERAL PRODUCT INFORMATION
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation .
CAUTION – RISK OF FIRE
This product requires installation by a qualified electrician. Before installing be sure to read all instructions and TURN THE POWER TO THE ELECTRICAL BOX OFF.
NEED HELP?
Please do not return this product to the store.
you need installation assistance, replacement parts, or have questions regarding our warranty. please call our customer care center:
Warranty
Sea Gull Lighting fixtures and components, when properly installed and under
normal conditions of use, are warranted to be free from defects in materials
and workmanship for one year from date of sale. ENERGY STAR® labeled products
are warranted for three years. Sea Gull Lighting at its sole option will
repair or replace, F.O.B. Factory, freight prepaid, any Sea Gull Lighting
product defective in materials or workmanship. Such replacement is the
exclusive remedy against Sea Gull Lighting should any of the products
delivered prove defective. Invoices for labor charges and/or charge backs for
labor will be denied unless prior written approval is given.
Any modification to a Sea Gull Lighting product not made at the factory will
void the UL or ETL listing as well as the Sea Gull Lighting warranty policy.
To register your fixture, please visit our website:
SeaGullLighting.com
Install the Fixture
- Secure the mounting plate to the electrical box with two mounting plate screws.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire to the neutral power line wire with a wire nut.
- Connect the black fixture wire to the hot power line wire with a wire nut.
- Align then place the fixture base onto the mounting plate studs and secure it with the two ball nuts.
- Place the shade onto the shade base and secure them in place by installing and tightly screwing the shade collar nut onto the socket using the shade tool.
- Screw the lamp into the socket.
- If necessary, repeat steps 6 and 7 for the remaining shade.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>