Genius 200BT USB SoundBar User Guide
- June 4, 2024
- GENIUS
Table of Contents
Genius 200BT USB SoundBar
Bluetooth 5.1 or Line-in
One simple click switch between Bluetooth and 03.5mm wired Line-in mode. You
can use these USB SoundBar 200BT speakers to connect music from portable MP3,
mobile phone, iPad, laptop computer, or smart tv.
USB Powered / Plug and Play
Our Bluetooth speakers are powered by USB, to avoid the trouble of charging.
In-line Control
Note:
Bluetooth model need using with power source of DC SV 1.2A.
Operation Description
- The USB power plug of speaker is plugged in.
- Turn on the power and enter the LINE function by default. The red LED is always on. At this time, the audio cable can be inserted into the audio device to play music.
- Short press * button on the remote control to enter the Bluetooth status, and the blue LEDs will flash alternately. At this time, you can pair the Bluetooth device. After the pairing is successful, there will make a notification sound. The blue LED is always on. At this time, the audio device can play music.
- Short press button on the remote control to stop playing music, click again to V+ resume playback. Short press •◄◄ on the remote control, increase the volume, press V+ twice consecutively to go to the previous song, long press •◄◄ button on the remote control to increase the volume, and the speaker sounds louder. Short press ►I on the remote control, the volume decreases, press twice consecutively to go to the next track, long press:►button on the remote control to decrease the volume, and the speaker sound is reduced.
- Pairing: In the Bluetooth status, long press .!. button on the remote control for 3 seconds. When the speaker will make a notification sound, it indicates that the current pairing device is released and the pairing mode is entered. The blue LED flashes alternately. At this time, Bluetooth device pairing can be performed.
- After press .!. button on the remote control to enter Bluetooth mode. If there is a paired device, it will return to the paired device. If there is no paired device, it will enter the pairing mode.
- In pairing mode, search for the Bluetooth pairing device 3 times, and it will automatically turn off if there is no signal for 5 minutes in Bluetooth mode.
- Turn off: Long press the ►11 button for 3 seconds to turn off the power and the LED.
- After restarting, the volume level will automatically return to the middle value, and the last volume level will not be remembered.
Button Function
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>